Coupling agent PE additive& Impact modifier &chemical auxiliary for PE with filler ,fiberglass,MB

Location:
shanghaiChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

We manufacture and supply plastic additives at good price.

1.Plastic Additives ,Coupling agent &PEadditive& Impact modifier &chemical auxiliary for PE with filler ,fiberglass,MB,Functionalized PE
2.toughening for modified PE

3..Quality Certificate:SGS,ROHS,ISO2008.

Grafted polyethylene PE-G-MAH
1. Introduction of PE-G-MAH

Table 1 grafted polyethylene simple performance

unit

NG1001

NG1201

NG1102

Density

g/ml

0.96

0.93

0.92

Melt index

g/10min

1.0

>20

1.0

Ingredient

HDPE

LLDPE

LDPE

Graft rate

%

0.9

0.9

0.9

2, the main purpose
NG1001: To improve the polarity of PE, and improving the compatibility of polar materials. It is used for the toughening of nylon, PC, as well as the compatibility agent of PA / PE, PC / PE and PBT / PE ,etc (such alloy plastics). When we put a small quantity in the reprocessed nylon, it could significantly enhance its mechanical properties. If NG1001 mixed with PE, it will improve the property of printing and spray paint of PE.
NG1201: It has high fluidity and good dispersity . It can be Used as the compatilizer of the reinforced PE & the mineral filled PE . Meanwhile It has the effect of toughening and compatibility to some alloy plastics .And when put the NG1201 in the PC/PBT & enhanced PC/PBT ,It will increase their toughness, and improve their appearance and the processing performance. And it also can be used as a plasticizer to mix with PA and PBT system, and improve the PA & PBTs toughness, but not affect their dispersity.
NG1102: It is used for the toughening of nylon, PC, as well as the compatibility agent for alloy plastics such as PA / PE, PC / PE and PBT / PE ,etc.

3, packaging, storage and transportation
25 KGS is packed in a kraft bag. In the process of transport and storage ,Please do not to be exposed in the heavy shine and rain, In the case of wet, it can be used after the drying more than 90 for 4 hours.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Shanghai Jianqiao Plastic Co., Ltd.
Phone Number:
  86-21-39170106
Fax Number:
 86-21-39170107