Model No.

TC-750

Machine Size (mm)

2370*1900*2300mm

Engraving range (mm)

700mm*600*350mm

Structure options

Iron structure

X Axis travelling range

700mm

Y Axis travelling range

600mm

Z Axis travelling range

350mm

Working Voltage

220V/380V 50Hz/60Hz

Spindle power (KW)

5.5-7.5KW optional

Spindle speed

3000-18000 (r/ min)

Max Speed without material

0-15000 mm/ min

Max working speed

0-8000 mm/ min

Servo motor power

850W

Positioning accuracy

±0.005/300

Repositioning accuracy

0.003

Spindle taper

ER25/ER32

Diameter of cutting tools (mm)

3.175/ 4.0/ 6.0/ 8.0/ 12mm optional

ATC

Optional

Control system option

SYNTEC, optional

Cooling system

Oil/Water cooling

Gross weight

3500KG

The Driving Motor is the executive component of the automatic control system, it works with the simple push of a button. The motor we use for our CNC engraver can be steping motor/ Servo motor, and the brand is optional.
AC Servo motor is more popular for its advantages on performance and accuracy, but more costly. The brand can be Schneider/ Yaskawa etc. with different prices.

There are two kinds of spindle: Water cooling and Air cooling spindles. And with different
power options: 1.5KW/ 2.2KW/ 3.0KW/ 4.5KW/5.5KW/6KW/7.5KW etc. The output voltage and frequency can be adjusted timely by a frequency converter. Advantage: work with high frequency, stable, low noise, fast heat dissipation, and long operating life.

We use Linear square guide rails offered by HIWIN of Taiwan. The coefficient of rolling friction
is small and positioning accuracy is much higher than sliding friction. The accuracy can be at μm level. It can work with high speed and low power dissipation, and can easily be assembled and replaced.