Single girder gantry crane

Single girder gantry crane is used wih CD MD hoists.It is track travelling small and medium-sized crane.Its proper lifting weight is 3 to 20 tons.Proper span is 12 to 13 meters,its proper working temperature is -20°C to 40°C.This product is a regular crane widely used at open fround and wearhouse to iqad,unload or grab materials.It has two controlling methods,namely ground controlling and cabin controlling.

Features Of Single girder gantry crane

1.Cpacity 3t-20t span is 12m-30m

2.This machine uses AC frequency converter, PLC control is equipped state monitoring control system.
3.All mechanism is operated in the operation cabin or remote control;

4.Crane power supplies could be cable drum and cable or sliding wire,

please choose one of them when you make an order with us.

5.The altitude height of site should be not more than 2000M.
6.Flammable, explosive and corrosive gas is forbidden in the work environment.
7.The crane is forbidden to lift fuse and blend deleterious article and flammable explosive article.

Satety Features Of Single girder gantry crane

1.Overload protection.
2.Main lifting motor with thermal protection.
3.Hooks with latch.
4.Rubber buffers.
5.Protective earthing.
6.Crane lifting limit switch and travel end limit switch.
7.Emergency switch can stop all movement when any dangerous happened.
8.Sub-assemblies characteristic are tested before assembly.
9.All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.
Design and construction rules:
All the standards which is required for the crane are the Chinese standard.
Painting:
Primer and finishing paint
Color: according to your demands.
Average thickness: about 100 microns.

Technology Data Of Single girder gantry crane:

Crane Shippment in HNKS Crane

Other cranes in HNKS Crane

HNKS Crane Ordering Notice

About product

1.Lifting capacity

2. Span ( rail centre to centre )

3. The required lifting height ( from hook to the ground ) and the span distance

4. Crane travelling length

5. What will be lifted by the crane

6. The crane and hoist movement speed (m/min)

7. The rail length and the height.

8. Single speed or double speed for lifting and travelling ?

9. Driver cabine control or pendant control ?

10. How many hours work per day ?

11. Power source : 380v,50Hz,3phase or others?

About Delivery: 36 days after the deposit and drawing confirmed

About Payment: L/C, T/T, Western Union

HNKS Crane After-sale Service

1.One year warranty for whole machines

2.Providing free quick-wear part

3.Low charge for continue maintenance when warranty is expired

4.Exclusive engineer support at any time

5.We can provide free training to end-users

Contact me now!

HNKS Crane welcome you!