Experts have recently developed, patented and tested several versions of new effective vortex air ozone generators. In their design successfully combines swirl of air and a powerful electric corona ozone generator type. It is known that ozonation of air vortex splitting and mixing fuel with air, gives an excellent active homogeneous fuel - air mixture (FA), which leads to an improvement in the completeness of its combustion chambers of the engine.

As a result, this Autonovelties - economizer, which implements these advanced technologies are very useful for use on any motor vehicle, because it leads to significant savings in fuel in any engine up to 30%, to increase engine power up to 20% and to reduce the toxicity of multiple engine exhaust . Swirling air ozonator, no doubt, eventually find wide application in various motortechnique with heat engines and other forms of transport, because the fuel in the future will only get more expensive. Analogues are known ozonizers air until ineffective, expensive and unreliable.

Hybrid vortex ozone generator air "Crown 2" to save fuel in any engine.
Legend of foto1.2 positions (the numbering of elements in the photo pass-through 1.2):
1 - body vortex ozone generator, 2-mesh, 3.4 - electrodes, 5 swirl-air nozzles, a 6-water spray nozzle ,7-tees, 8-opening tee, 9-to-air induction hose, 10 short duct connecting hoses, 11 water supply hose, a 12-oscillator, a 13-inductive coil, 14,15-high-voltage spark plug wires, 16-rubber connecting plug (for mounting the housing 1 in the air path ICE), a 17-connection hoses, 18.19 -the electrical wires to the terminals for connecting the electronics unit 12 to the low-voltage ignition coil input, 20.21, electrical wires for connecting the electronics unit 12 to a circuit board to the battery, a 22-socket for the selection of air with an air filter to the vortex air nozzles, 23-outlet air filter, 24 - onboard battery 12 volts.
Installation of the product relative to the vehicle is simple and is described in detail in the Regulations.
Humidification
Note that in one of the update a given product is also a prime feeder of water in the dosed amount of a water hose 11 to the nozzle 6 (Picture 1.2) for humidifying the air. Humidification device, which is produced by us individually and can be used together with the proposed eddy ozone treatment and additional fuel savings of 10-15% during the warmer months.
Installation of the product relative to the vehicle is simple and is described in detail in the Regulations.
Humidification
Note that in one of the product, update a vortex ozonator "Korona2" is also a prime feeder of water dosed amount of a water hose 11 to the nozzle 6 (Picture 1.2) for humidifying the air. Humidification device, which is produced by us individually and can be used together with the proposed eddy ozone treatment and additional fuel savings of 10-15% during the warmer months.