Description

Whitecoat is an acrylic-based, single component, ready to use water insulation material that is resistant against plant

roots and UV rays.

Technical Data

• Appearance : Colored paste

• Density : 1.38±0.02 kg/m³

• Shore A hardness : 70

• Adhesion Strength : > 1.5 N/mm²

• Creep : %250

• Crack Bridge Creation : >2 mm

• Solid Matter Ratio : 62-70%

• Water Vapor Permeability : 34.28 g/m² 24 h

• UV Fastness Test : No crack

• Drying Time : 12 hours

• Fire spread capacity : 0 (zero)

Usage Areas

Water insulation in old and new terrace roofs. Renewal of the old roofs and coating the water gutters. WHITECOAT can

be applied on the construction materials like that are desired to be watertight and moistureproof such as concrete, plaster,

brick, enameled tile, briquette, gas concrete, wood, galvanize, sheet iron, and zinc. It can be used reliably on all horizontal

and vertical surfaces made of such materials, roofs and terraces, window frame, draining board, fringe, rain gutter, strainer,

chimney bottom repair, and undercoating insulation of the wet areas.

Advantages

Single component. Ready to use, easy to apply. High adhesion strength. Resistant against plant roots. It creates crack

bridge and remains elastic. UV fastness. Water-based, nontoxic, and nonflammable. It has numerous color options.

Application

Depending on the application surfaces, WHITECOAT must be thinned by water in the ratio of 1:1 or SPR 104 a prime

coat must be applied. Then, apply the 1st layer of WHITECOAT on the surface. While it is wet, apply the fiberglass net

on it by roll, and ensure that the net is buried into WHITECOAT. Leave to dry for minimum 2 hours. Then, complete the

application of the 2nd layer of WHITECOAT so that the net beneath will be covered completely. Apply the final coat so

that the total covering thickness will be completed and leave the covering to dry for one night.

WHITECOAT 5-Layer Water Insulation System:

With WHITECOAT 5-layer, fiberglass net-supported water insulation system, the coat thickness differences that may arise

from the surface unevenness on the roofs are prevented, and the same covering thickness can be achieved in every

area.This system is appropriate for water insulation to be applied in the positive direction in the terrace roofs that are

subject to rare foot traffic.

Consumption

0.75 - 1.50 kg/m² depending on the application floor. 1.75 kg/m² for a covering of 1.5 mm dry film thickness

Package

20 kg plastic buckets

Storage Life

For 12 months in its unopened, original package in cool and dry environments.