High Quality DC Rectifiers

Location:

Ludhiana, India

Status:

New

Sample Availibility:

yes

Payment Terms:

Cash, Bank Transfer, Letter of Credit, T/T, L/C

Categories:

Home > Electronics & Electrical > Rectifiers

Product Description

We manufacture state of the art technology Rectifiers used for Plating, Anodising & Hydrogenation applications.

We manufacture state of the art technology Rectifiers used for Plating, Anodising & Hydrogenation applications. The Rectifier consists of three parts.
Double wound Transformer.
Linear Rolling contacts type Regulators.
Silicon Diode Cubicle.
Superior Features of our DC Rectifiers.

We manufacture state of the art technology Rectifiers used for Plating, Anodising & Hydrogenation applications. The Rectifier consists of three parts.

Double wound Transformer.

Linear Rolling contacts type Regulators.

Silicon Diode Cubicle.

Superior Features of our DC Rectifiers.

We have Plating Rectifiers
It will be designed such that it will take up/absorb the Spike/Surges produced in the system, which no other manufacturer is giving. The spike which being of very high voltage persists for milisec if passed on to the system, will result into damage/burnt of all the electrical/electronic devices connected with it results in heavy loss.
Our Rectifier will be suitable for 100% load for continuous duty cycle and recommended to put 10% over load also.
The efficiency of our Transformer used in the Rectifier will be more than 95%.
The Ripple contents of our Rectifier will not be more than 5% of the value while in other manufacturers case, the Ripple contents are always higher even more than 10% by which the output DC voltage will not be pure and will not perform efficiently.
We Design our Rectifiers in such a way that their Temperature Rise should not increase above 25-27 degree Centigrade above Ambient at 100% load results in Higher Efficiency and lesser losses while in others case, they design their Rectifier with 45 degree Centigrade Temp. rise above ambient.
We always use IPT Transformers in our Rectifiers, which further reduces the Losses of the system while any other manufacturer is not using the same.

We have Plating Rectifiers

It will be designed such that it will take up/absorb the Spike/Surges produced in the system, which no other manufacturer is giving. The spike which being of very high voltage persists for milisec if passed on to the system, will result into damage/burnt of all the electrical/electronic devices connected with it results in heavy loss.

Our Rectifier will be suitable for 100% load for continuous duty cycle and recommended to put 10% over load also.

The efficiency of our Transformer used in the Rectifier will be more than 95%.

The Ripple contents of our Rectifier will not be more than 5% of the value while in other manufacturers case, the Ripple contents are always higher even more than 10% by which the output DC voltage will not be pure and will not perform efficiently.

We Design our Rectifiers in such a way that their Temperature Rise should not increase above 25-27 degree Centigrade above Ambient at 100% load results in Higher Efficiency and lesser losses while in others case, they design their Rectifier with 45 degree Centigrade Temp. rise above ambient.

We always use IPT Transformers in our Rectifiers, which further reduces the Losses of the system while any other manufacturer is not using the same.

Muskaan Engineers is a name known for reliability and continuous improvement in the field of rolling contact type Automatic Voltage Controllers. The systems are designed and supervised by a team of qualified engineers having decades of experience to achieve best possible quality to total customer's satisfaction.Inspite of best efforts, no state electricity board can ensure constant voltage to the customer because of long and inadequate distribution lines and irregular load pattern on distribution transformers. Generally Voltage is low during day time and high during night hours. Moreover on holidays, peak hours, rainy days and when agricultural and Industrial load is switched off, the voltage rises sharply which is more dangerous.This higher current affects the electrical motors (Particularly smaller capacity motors up to 7.5 H.P) in three ways :Higher Current produces higher losses in electrical motors which causes premature failure of windingThese higher losses of electric motors also increase the losses of cables, switches, transformers and other associated equipment.For smooth continuous operation of motors, over load relays are usually set at 20% higher setting. with the installation of the stabilizer and maintaining 390/400 volts, the motor will operate smoothly drawing 15 - 20% lesser current and correspondingly the relay setting can be reduced by 15- 20%. In case single phasing occurs, the relay will trip in 40-50 seconds. The Motor can withstand the high current for this period and will be safe. Also, the relays, contractors, switchgears ,etc. incorporated with the motor will be safe.

Muskaan Engineers is a name known for reliability and continuous improvement in the field of rolling contact type Automatic Voltage Controllers. The systems are designed and supervised by a team of qualified engineers having decades of experience to achieve best possible quality to total customer's satisfaction.Inspite of best efforts, no state electricity board can ensure constant voltage to the customer because of long and inadequate distribution lines and irregular load pattern on distribution transformers. Generally Voltage is low during day time and high during night hours. Moreover on holidays, peak hours, rainy days and when agricultural and Industrial load is switched off, the voltage rises sharply which is more dangerous.This higher current affects the electrical motors (Particularly smaller capacity motors up to 7.5 H.P) in three ways :Higher Current produces higher losses in electrical motors which causes premature failure of windingThese higher losses of electric motors also increase the losses of cables, switches, transformers and other associated equipment.For smooth continuous operation of motors, over load relays are usually set at 20% higher setting. with the installation of the stabilizer and maintaining 390/400 volts, the motor will operate smoothly drawing 15 - 20% lesser current and correspondingly the relay setting can be reduced by 15- 20%. In case single phasing occurs, the relay will trip in 40-50 seconds. The Motor can withstand the high current for this period and will be safe. Also, the relays, contractors, switchgears ,etc. incorporated with the motor will be safe.

Company Information

Muskaan Power Infrastructure Ltd. ( Formerly Known as Muskaan Engineers ) is considered as one of the upcoming name in the field of Electrical & Power equipments for more than a decade. We are engaged in manufacturing Distribution & Power Transformers, Servo Voltage Stabilizers, Plating Rectifiers, Hydrogenation Rectifiers, Isolation Transformers, Ultra Isolation Transformers, HT Two in One Systems, HT Servo Voltage Stabilizers, Furnace Transformers, Variable Transformers & Special Purpose Transformer under Muskaan’s Brand.

Our focus has increasingly broadened to embrace the sustainable development through quality products with full backing support for service after sale.

we have been awarded with ISO 9001:2008, ISO 14001: 2004 & OHSAS 18001: 2007 from BSI for all equipment's manufactured in our company.All our products have passed through various quality test stages and are state-of-the-art technology products. Our equipments are designed for producing high efficiency at lower costs with lesser payback period.

Enthusiast by this growth and guided by our principles of Creativity, Commitment, Concern, Care and Core values. We continue to create innovative & practical product line that surrounds industries to ushers in a better tomorrow.

We have a very strong customer base in India & exporting our equipments to various countries like South Africa, Angola, Zambia, Ghana, Jordon, Iraq, UAE, Tanzania, Uganda, Kenya, Nigeria, Sudan, Myanmar, Saudi Arabia, Kongo, Afghanistan, Nepal & Bangladesh etc. & are increasing our clientale at a faster pace in other countries.

We have complete marketing offices / franchises in all parts of India with company agents at Dubai, Saudi Arabia, Tanzania, Kenya, Ghana.

Our motto is to give our customer the value for the money of the product & life time services

Corporate Vision

To create value by providing integrated solutions and superior knowledge based products and services in the domain of generation, transmission, distribution and utilization of electrical energy.

To become the company of choice for utilities, industry and households in the global market, by leveraging technology and productivity through a highly empowered and engaged team and a world-class provider of integrated solutions to our global customers in the domain of transmission and distribution of electrical energy, by offering reliable state-of-the-art products and services.

Certifications

Muskaan Power Infrastructure Limited is an ISO Certified Company. Previously it was an ISO 9001: 2000 certified company. Now, we have been awarded with ISO 9001:2008, ISO 14001: 2004 & OHSAS 18001: 2007 from BSI for all equipment's manufactured in our company. ISO 14001: 2004 for complying with the environmental Management Systems and OHSAS 18001: 2007 for complying with occupational and health management systems. We are producing equipment's which are non hazardous and non toxic.

Stringent quality standards and ISO 9001: 2008 certification have created a special place for the company's products in the market, both in India and Abroad. The company believes that at MUSKAAN quality not only determines the end product but also the Systems, Processes and Operations at all levels.

This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here