ONLINE UPS High Frequency:

A most advanced technology UPS, brings new level of efficiency and reliability in single-phase design. It is an innovative, microprocessor based, hi-frequency, active PF corrected, true online double conversion UPS with total control on harmonics at both input and output. Hi-Frequency technology specially developed for high crest factor loads, responds swiftly for changes in load ensuring superior quality power to the loads.

Microprocessor Circuits:

They analyze and control the harmonics levels at the input that may back feed into the line. Widens the input window for voltage and frequency depending on load levels and provides total protection for the inverter and booster circuits.

Active PF corrected :

It boost fly - back converter with active current shaping techniques enhances. Input power factor as high as 0.98 with current harmonicslessthaI110%, thus meets stringent EMI/EMC standards like EN5009h2, a essential one for better utility of input resources with less pollution.

Intelligent Converter :

Input Voltage window is extended to low as 120V, depending on load quantum, thus enables better utilization of mains power even under chronic brownout condition. Extended battery life.

Elegant Engineering :

The power and hi-speed digital circuits are compartmented to unbind the design from signal integrity and thermal related problems. The entire power circuit is constructed on a separate PCB thus protects the power device failures against spurious triggering and provides highest level of power reliability.

Wide frequency :

Wide frequency window of 46 to 54 Hz at the input ensures impeccable synchronization with Genset supply, unlike legacy UPS thus prevents unnecessary battery discharge on Generator supply.

Self. Diagnostic :

A unique self. Diagnostic feature during startup reconfirms the stability of power and drive circuits by simulating fault conditions like utility failure over temperature and thus ensures uninterrupted power during operation

Technical Specifications :

Online Double Conversion High Frequency Ups

	Model	1 KVA	2 KVA	3 KVA
INPUT	Voltage	120 V at 30%, 140 V at 50% & 160 295 V at 100%
	Frequency	50 Hz (60 Hz) + - 2 %
OUTPUT	Voltage	220 V AC (230 V AC) + - 3%
	Current	4.55 A	9.1 A	13.6 A
	Frequency	50 Hz + - 5 %
	Wave form	Sine Wave
	THD	Linear Load < 3% Non Linear Load < 6%
Protection	General	Electronic protection for Output Overload, Short Circuit, Over Temperature, Battery Low & Over Charge.
	Surge	IEEE527
	EMI/EMC	EN50091-1
	Noise	FCC.A
	Alarm	Audible Mains Failure, Load on Battery, Inverter Fault
Overload Protection		> 130 % - 200 MS > 150 % - 10 MS
Transfer Time		0 MS
Battery		SMF Battery (Sealed Maintenance Battery)
External Battery Voltage		36 V DC	96 V DC	96 V DC
Ambient Temperature		0 40 Degree C
Humidity		30 ~ 95 % Non Condensing
Communication		9 Pin D type connector (RS 232)
Noise		0 ~ 55 DB (1 m)
Size (WXDXH) mm		145x405x220	195x455x350

SALIENT FEATURES:

Microprocessor based / IGBT Technology.Intelligent, Compact and sleek UPS.LED / LCD Status display.Enlarges input voltage window based onLoad percentageHigh AC-AC efficiencyActive Power Factor Correction (0.99)Small, light, easy to install and operateGenerator compatibleProvision for internal batteriesLonger back upEMI/RFI filters at input and outputCold StartN+X Parallel connectionGalvanic isolation optionRipple free charger for enhanced battery lifeIntegral static bypass