Available raw materials of pyrolysis plant of Waste management pyrolysis plant

1. How to deal with the waste gas?

The extra waste gas could not be emitted directly in the air, as it would get accumulated in the surroundings, and even a single spark can lead to blast. The waste gas is transferred back to the heating chamber to heat the reactor as fuel. During this period, the whole plant only cost little coal. It is hard to store this waste gas, because this gas is coming together with the tyre oil gas. The cost for storing this waste gas is more than the profit this waste gas can give. So usually this waste gas is burnt for heating the reactor.Waste management pyrolysis plant

2. Carbon black gets accumulated at its oil-out pipe. How it can be auto-shifted to the store?

In the reactor, there is weld spiral plate on inwall. When one batch finished, cool down the reactor for several hours. Open the carbon black slag door, let the reactor rotating in the opposite way, the carbon black will be transferred out automatically. Then you can dig a pool beside the carbon black door, the carbon black will drop into the poor, then you can use the spiral carbon black dregs machine to help.

3. They say that oil should be removed from the tank before running next batch. Then whether another oil tank is required so that we can produce continuously?

Yes, they are right, the oil shall be pumped out before running next batch. We provide the oil pump. For the oil tanks, we can’t provide very big one, because the containers don’t have enough space. The customer need to prepare one big oil tanks by himself. Waste management pyrolysis plant

4. What is the application of raw carbon black?

Usually, the carbon black is sold out directly as rough carbon black. Or the carbon black can be refined again, become good carbon black with a higher mesh.

5. What about the steel wire? How to remove it?

Steel removal is a big question, as it gets entangled in the reactor. Now, the steel is easy to be out. When the carbon black finish discharging there is only bunches waste steel inside the reactor. Then pull it out. You can use the steel wire hook in the auto feeder, it is very convenient.