waste tire oil refining machine

Firstly, the feeding-in system feed waste tyres/rubber/plastic into the reactor automatically.

The feeding-in system can be manual operation or auto-machine according to customers'

requirement.Feeding the raw materail by auto-feeder. It can push large plastics and qhole

tyres in the reactor by using hydraulic pressure as power which has 60 tons push power, the

process is very stable and convenient. Thus can achieve continuous producting.

Second, heat the reactor, the pyrolysis process begin.

1.Using Q345R boiler steel which have added manganese,can resist high temperature and high

pressure.The main engine uses horizontal-type of 360ostructure-0.4r/min.

2.Catalyst room, reduce the oil gas speed so that keep the oil quality.

3.Cooling system: use condensers, based on Refining theory, whatever distillation of solid

crude oil or waste oil, all finish by heating to gasification and cracking, and then cooling,there

are 61 cooling pipes in each condenser,so that cooling area can reach to 52 sq.meter and

ensure the biggest oil yield rate.

4.Dedust system: It is dual desulfurization,there are 20 high pressure nozzles in it and it can press alkaline water into nozzles by water pump,and alkaline water neutralizes acidic materials from black

smoke which produced by fuel(coal,wood,oil) which is for heating reactor.In addition,it is s style design,

this can enhance the smoke route and make the smoke emit to air as steam.

Chemical equation:

CaO + H2O=Ca(OH)2;

SO2+Ca (OH)2=CaSO3+H2O

5.Waste gas recycling system: In the process of refining oil, when the gas is heated up to 150,

it will produce a large amount of gas-CH4& C4H8 , which cannot convert to liquid at normal

temperature and normal pressure. However, these gases can be used as fuel, which is not only

environment protection but also energy conservation

6.Carbon black recycle system: Heaving dragon screw conveyor.

The solid residua will be left after the catalyst splitting from scrap plastic, approximately take up 30% to

35%.Its main component is the black carbon, which can be used as raw materialsin industry, as

well could be mixed with the coal ash to produce the raw material of the thermal power plant, and also

could be applied to the manufacturing of the coal ash brick (one kind of environmental protection building

material).

Third, you can get the crude oil , carbon black, steel.

Goods in stores in our factory

Our delivery of tyre oil refining machine

Our customers

Our certification

my contact information