Product description

The automotive education and training equipment contains whole car circuit system of Passat B5. It can fully show the structure and working process of the Passat circuits. It is suitable for the theoretical teaching and practical operation of the auto body circuit system in the secondary vocational and higher vocational institutions.

Structure and composition

starting system, charging system, wiper system, lighting system, electric windows, instrumentation systems, sound systems, terminals and connections, wiring diagrams instructions, failure settings and troubleshooting system, mobile gantry, high-capacity battery or 12V switch power, supporting manual and experiment guide book.

Features

1. It can fully demonstrate the structure of the various systems and the working principle of the Passat B5 circuit, and you can achieve the desired teaching effectiveness.

2. It contains the following system. And all of them can operate properly. It allows the students to conduct a comprehensive training about the whole car electrical.

1) Starting / charging system; 2) lighting and signal systems; 3) Wiper sprinkler system;

4) Power mirrors;

5) Electric windows and central control system;

6) Sound system; 7) Instrumentation system;

8) Speaker system

3. You can use the instruments to read the data flow, read and clear fault code.

4. It has the specialized troubleshooting and set areas. You can set multiple common faults, stimulate the fault, test the fault and exclude the fault.

5. The aluminum panel is painted with color high quality schematics. And it is elegant and durable. It is very easy for the students to analyses and to understand the work process of the car charging system.

6. Diagnostic block installed on the bench can be connected to a dedicated or universal auto decoder. And engine self-diagnostic functions like reading fault codes from the engine electronic control system, clearing fault code and reading data stream.

7. Fault setting function: Multifunction switch, intelligent integration system or intelligent fault set appraisal system can be set according to the user optional manual fault to test the equipment.( equipped with a communication interface and network interface )

8. After setting the fault, the participant can use the dedicated instrumentation to check out the location and content of the set point of failure through the fault troubleshooting exercises.

9. Optional functions:

This optional feature is the use of PLC or microcontroller program control to form a network system, can achieve a master control multiple simultaneous connections students test terminal (The student machine is made with an experimental box.) Each student terminal has the same control circuit diagram and the same detection point with the experimental station control panel. When the master laboratory bench set fault, the student end can also detect the same fault.

Production technology

1. Nylon casters: Diameter of 75mm, width 35mm, with locking casters to mobile devices. And it can move freely, and facilitate teaching

2. Panel process: Aluminum panel with surface oxidation painting and UV Flatbed high true color schematic. It is durable and nice.

3. Quality steel; 40x80x3.0 steel

4. Safety fence: 3.0 stainless steel, 6CM punching board

5. The material of the circuit schematic: thickness 4mm aluminum plate

6 .Detection terminals: 6mm stainless steel terminal, 6mmLED indicators

7. Dimensions: about 1260x850x1860mm

8. Maintenance intervals: 90 days