Gorvia PU Foam Item-M Polyurethane Foam Producers

Tag: Utmost yield 65L, High elastic foam, All-Season use, Shelf Life: 18 months

Gorvia PU Foam Description:

GF-Series Item-M 750ML PU foam, which is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the postexpansion is quite low to prevent deformation.

The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure.

Gorvia PU Foam Technical Features:

Guid for using:

1. Shake can well to make the foam ready for use.

2. Clean the substrate and spray some water on it..

3. Screw foam dispenser on tightly and turn the can upside down.

4. Vertical fill the gaps from the bottom upwards.

5. Foam is tack-free (surface drying) in 8 to 10 minutes in temperatures +18°C and +25°C; Higher temperatures will result in faster setup time.

6. Remove unwanted cured foam by cutting it with knife. Well done!

Kindly Reminder:

For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use.