natural gas generator set

1. About hydrogen gas

Hydrogen gas is separated from the water electrolysis hydrogen and oxygen gas for industrial cutting. Hydroxide produced by the power generator equipment and water, a mixed gas of hydrogen, acetylene and high temperature close to the temperature of the flame cutting was concentrated, preheating, high cutting efficiency, raw water only, everywhere desirable, therefore, generated the hydrogen gas cheap, non-polluting. No effect on the human body of the gas combustion.

2. Technical parameters

3. Principle

a. The principle is based on the theory of electrolysis.

b. It is consumed only water and electricity in the course of using

c. To electrolyze water into pure hydrogen and oxygen.

d. Burning the gas then form Oxy-hydrogen flame.

e. Oxy-hydrogen flame is a high temperature energy source which can be used forprecision cutting processing equipment, giving results that are economical, reliable, safe and environmental.

4. Characteristics of hydroxide cutting machine

1. It is a mature production technology, which can be operated safely and reliably.
2. The process flow is short and simple.
3. Both energy consumption and production cost are relative low.
4. Simple and easy operation, high automation.
5. No environmental pollution.

5. Features of hydroxide cutting machine

a. Safer fuel gas

Mixture of flammable gas and air or Oxygen is explosive, and it has a lower and upper limit of concentration for explosion.

Lower explosive limit for Propane gas = 2.2%
Lower explosive limit for Acetylene gas = 2.5%
Lower explosive limit for Hydrogen gas = 4.0%.

Thus, Hydrogen is much safer than the other gases because of its higher value of Lower Explosive Limit. Additionally, because Hydrogen is lighter than air, it does not stagnate but will quickly diffuse in the atmosphere.

b. CO2 Emissions reduction

Hydrogen is a clean energy source. Water is the only product of combustion. Hydrogen combustion produces no CO2 because the molecule contains no Carbon atom, Hydrogen is the cleanest energy as an alternative to LPG, Acetylene gas or Natural gas.

c. Lower heat stress

Steel plate when heated for the same time by both conventional and Hydrogen fuelled flames shows the following heat distribution in the plate. The high combustion speed of the Hydrogen flame reduces the flame area and concentrates the thermal energy. This allows the high pressure oxygen passage to heat only the immediate area being cut, preventing excessive heat transfer to the surrounding area. This reduces cooling time and distortion caused by excessive heat stress.

6. The effect after using oxy-hydrogen machine

7. Other product features

1. High Security

Do not produce "gas explosion" and endangering the lives of staff members.

Do not produce "carbon monoxide" and endangering the lives of staff members .

Gas supplies immediately, do not store gas.

2. High environmental

Complete combustion of the gas can produce

There will be no smoke and carbon monoxide produced

3. High efficiency

When compared with acetylene, LPG and other gas,our hho gas is both economical and affordable.

4. Centralized heat

Low heat radiation, can maintain a good working environment, avoiding operator fatigue due to heat.

5. High mobility

Body size is moderate, the bottom of the additional casters for easy moving , suitable for a variety of places.

8. Factory working show

9. Packaging

We can do OEM and also can design as your special request. Welcome to visit our factory at any time in the future.