Original IKO lz3600 Needle Roller Bearings

NEEDLE ROLLER BEARINGS

Description

Needle roller bearings are roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings

have a high load carrying capacity and are therefore extremely suitable for bearing arrangements where radial space is limited.The outer rings of this

needle bearings and bearings case are interference fitted without axial fixed settings. The effcient capacity can be maintained even if in the condition

of high speed and huge loading capacity.

Needle roller bearing used for general engineer

1.open type drawn cup needle roller bearing(1)

2.closed type drawn cup needle roller bearing(2)

3.needle roller bearing with inner ring(3)

4.needle roller bearing without inner ring/ needle roller bearing without inner ring and cage(4)

5. full needle roller bearing with cage or without cage(5)

Type of needle roller bearing

1.radial needle and cage component

2.NA,NKI needle roller bearing

3.RNA,NK needle roller bearing without inner ring

4.HK type drawn cup caged needle roller bearing

5.BK type drawn cup caged needle roller bearing

Metric needle roller bearing

HK,BK,F,FH,FY,MF,MFH,MFY; TA..Z,TLA..Z,TAM,TLAM,YT,YTL

Inch needle roller bearing

SCE,BCE,SCH,BCH,SN,B,BH,M,MH,;BA...Z,BHA...Z,BAM,BHAM,YB,YBH

1.RS--- single side sealed with metric system

2.2RS--- double sealed with metric system

3.P--- single side sealed with inch system

4.PP--- double sealed with inch system

5.STO--no outer wall,an inner ring roller bearing

More introduction on the needle roller bearing

RNA22...2RS double sealed, no inner ring roller bearing

NA22..2RS double sealed, an inner ring roller bearing

NATR...PP flat ring axial guide roller bearing

NATV...PP flat ring axial guide roller bearing, full needle

NUTR rolling body guide roller bearing, full roller

CRY inch flat ring guide roller bearing

ASI/OH--oil hole;HK,BA,TA..Z--drawn cup caged needle roller bearing with open end;BK,TAM,TLAM--drawn cup caged needle roller bearing with closed end.

1.F--drawn cup caged full needle roller bearing with open end

2.FY,YT--drawn cup caged full needle roller bearing with open end(grease limit)

3.FH,YTL--drawn cup caged full needle roller bearing with open end(heavy series)

4.MF--drawn cup caged full needle roller bearing with closed end

5.MFH--drawn cup caged full needle roller bearing with closed end

6.SCE--drawn cup caged needle roller bearing with open end

7.BCE--drawn cup caged needle roller bearing with closed end

8.SCH--drawn cup caged needle roller bearing with open end

9.BCH--drawn cup caged needle roller bearing with closed end

10.SN--drawn cup caged full needle roller bearing with open end

11.B--drawn cup caged full needle roller bearing with open end

12.BH--drawn cup caged full needle roller bearing with open end(heavy series)

13.M--drawn cup caged full needle roller bearing with closed end

14.MH--drawn cup caged full needle roller bearing with closed end(heavy series)

Numbers of Needle Roller Bearings

Roller bearing