paper chemical liquid surface sizing agent

The surface sizing agent is liquid type, my factory can produce both cationic type and anionic type. Or you can send sample to us, my techincal professor would check to produce the one you want.

1. Chemical composition:

Styrene-acrylate emulsion

2. Technical parameters:

3. Application:

Used in the surface sizing system of paper and paper board

4. Product characteristics:

1. Well compatibility, it is compatible with anionic, non-ionic additives, CMC, PVA, oxidized starch,

dye and fluorescent whitening agent etc.

2. Low viscosity, so it is easy to deal with.

3. Nice stability.

5. Usage:

Add this product to the well-gelatinized starch solution at the proportion of 1:10~20 to surface sizing starch, then stir it and add this mixed solution to the machine continuously.

6. Features:

1. It can effectively increase the surface strength and improve the printability of paper .

2. It can reduce the phenomenon of dropping offer fiber and powder

3. It can improve the ink-jet printability and the adhesion of the ink

4. It could be used to adjust the sizing degree quickly and improve the water resistance of the paper.

5. It do not affect the Fluorescent whitening performance of the inner sizing agent.

7. Note:

1. It is a anionic product, which should avoid to mix with any ionic product.

2. Its shelf life lasts for 6 months under the temperature of 5-45°C.

8. Safety :

It do not have negative effect on people’s health in the process of transporting, storing and using.

9. Packing:

200kg or 1000kg per plastic drum

10. Reference usage:

0.1%-0.3% (product in proportion to the dry paper)