European Standard Pollution Free Pyrolysis Plastic to Oil Plant

1. 3D flow chart Plastic to Oil

2.Eight advantages of our plants

1. Security: Our equipments have anti-blocking device, also have pressure gauges, alarms, safety valve

and vacuum equipment. Normal operation are going on under negative pressure or ordinary pressure.

In case of congestion, there will be pressure that arouses alarm, if no response from workers, safety

valves will decompress pressure automatically. The device guarantees no accidents. Workers shall

operate normally and check pressure gauges, alarm and safety valve pipe flow regular. To ensure safety

in production, the shift workers are not free to their posts

2. Environmental protection: environmental protection includes four parts, water, slag, gas, sound

(1) Water includes two parts. First, condensing water can be recycled, water release is that pour into .

no pollution, only a little high temperature

(2) Slag is by-product that can make carbon black, pastes and industry or agriculture coal after adding

chemicals

(3) Gas includes two parts .First ,exhaust (Composition is methane , propane, butane) and hydrogen

produced in the refining process are burned in burning furnace through the exhaust gas recovery

system;

second smoke dust generated from burning coal or exhaust smoke meet the emission standards of

national requirements after the dust treatment of dust catcher .No odor let out during operation

(4) Noise: Noise emissions are below the national standard

3. Energy conservation: recycling of exhaust gas and science fire channel design can save energy

and thereby reducing costs.

4. Long life: hot-blast stove is long life, but not energy-saving , its consumption of energy is much

greater than the repair costs of furnace .Direct fired reactor is energy-saving but short life . It is a

contradiction. Our engineer have tests for lots of times, and find the most suitable thickness is 16

mm, not only energy, but long life

5. High degree of automation: the advanced device, with a small forklift, conveyor and automatic

feeding machine. Equipments can feed, slagging, alarm, decompress, adjust negative pressure and

exhaust recycling, the whole process is automatic

6. Mature technology: oil refining is a special industry (high-profit and high-risk), technology is the key ,

we are engaged in oil refining for many years and have rich experiences to ensure safety and oil yield

as well as recovery

7. Guarantee with after sales service: we has Christian background, love is the heart of our culture.

Selling and responsibility. Your success is our aim. We have a good reputation in the industry

8. Low cost: all costs are low because of being located at the suburbs. Advanced and complete

processing equipments, almost no external processing and customer interests oriented business

philosophy. It stands to reason that the price is low

3.Brife introduction about equipment

1) Using 245R boiler steel and the thickness is all 16mm.(The thickness would be adjusted according the

requirements of the customers). The main engine uses horizontal-type of 360° structure-0.8r/min

2) Gas separator & Depositing tank, Depart the heavy oil and impurities from the oil gas to purify the oil

3) Cooling system: use Cooling pool, based on Refining theory, whatever distillation of solid crude oil or

waste oil, all finish by heating to gasification and cracking, and then cooling, so there is close relationship

between the yield rate and condensation. So the best and easy way is increase the area of condense and

which make the biggest yield rate

4) Dusty system: Desulfurization deducting, Water film cyclone, Bag deducting Desulfurization dedusting:

remove the sculpture(when use coal as fuel) and dust Water film cyclone: for the second removal. Bag

deducting: to make the smoke no different from the air

5). waste gas recycling system: In the process of refining oil, when the gas is heated up to 150 , it will

produce a large amount of gas-CH4& C4H8 ,which cannot convert to liquid at normal temperature and

normal pressure. However, these gases can be used as fuel, which is not only environment protection

but also energy conservation

6). Carbon black recycles system: Heaving dragon screw conveyor

The solid residua will be left after the catalyst splitting from scrap plastic, approximately take up 5% to

10% of the waste tire. Its main component is the black carbon, which can be used as raw materials in

industry, as well could be mixed with the pulverized coal ash to produce the raw material of the thermal

power plant, and also could be applied to the manufacturing of the pulverized coal ash brick

(environmental protection building material)

Then, you can get the crude oil , carbon black, steel

4.Financial analysis report

5.Pictures show

Installed plant in our factory

Reactor

Catalyst room

Oil water separator

Condenser

Waste gas cooling device

Dedusting device

Smoke emit from chimney

Loading

Goods in stock

Shipping