2014 Hot automatic industrial biomass pellet burner

1.No pollution

2.Easy to operate

3.PLC automatic control

4.Patented produce

Advantage of biomass pellet burner

1. Energy-efficient: it uses the renewable biomass energy as fuel with low cost

2. High thermal efficiency: with boiling type half gasification combustion and tangent spiral-flow type air distribution design, the fuel can burn completely, and the combustion ratio can reach higher than 90%

3. Stable and reliable performance: the equipment is running under micro-pressure state, it won't appear tempering or flame-lifting phenomenon

4. Low carbon and pro-environment: it realizes the sustainable use of energy by using the biomass energy, with low emissions of smoke dust, sulfur, nitrogen and carbon dioxide

5. Easy operation: adopt automatic feeding system, easy to operate

6. Low investment and running cost: the biomass burner is with reasonable design, it costs little money when used for boiler reforming

7. Biomass Burner Applied Range: biomass burner is widely used in various heat energy industries, such as boiler, die-casting machine, industrial furnace, incinerator, smelting furnace, drying equipment, drying plant, painting equipment and asphalt heating equipment etc

Technical parameter

Photos of biomass pellet burner

Henan Golden Land Gas Engineering Co., Ltd was founded in 2000, and registered in 2007. It's the first company engages in a variety of industrial furnace, such as research and development projects, designs and manufacture, installation and technical consulting.

Our main products are coal gasifier, biomass briquette machine, wood pellet machine and biomass burner. Which are with good quality, meet international quality certification, ISO9000 and CE.

Adhering to the principle of " High quality, best service, high-tech ", we would like to work with you hand in hand to create a better future.

Questions you may concerned

1) What's the use life of your biomass burner?

My answer: 5 years if you operate obey our operation manual

2)What’s the consumption per hour of your burner?

My answer: This is comply with the model you choose, details pls check section 4.

3) Which biofule raw material do you use?

My answer: many biomass is ok,such as sawdust pellet, rice husk pellet, wheat pellet and other biomass waste. The size of pellets usually is 6-12mm diameter.

4) What’s your combustion principle?

My answer: Suspension combustion, half fuel half air, burn furthest can up to 95% or more.

5) How about the ignition system?

My answer: Automtic system, diesel & petrol either is ok.

6) How much time it takes to start the burner?

My answer: About 25-40 minutes.

7) How much time it takes to install the machine?

My answer: It's easy for our technicians, only 2 hours is enough.

8) How to close the burner?

My answer: Close the feeding button on the automatic control panel, then close the air blower until the fuel is used up.

9) How many powder it needs?

My answer: Depends on the model you choose, details will send you by email.

10) How many people it needs to run the burner?

My answer: Only 1

11) Can it work continuous?

My answer: Yes, it can keep working for 24 hours.

12) How about the slag running off frequency?

My answer: 2 days for one time.

Contact us