Newest Method of Cleaning Car Engine Carbon

-----Oxy-hydrogen Carbon Cleaning Machine

The traditional methods are out of date like foam method. It will bring Chemical which would damage the engine part. And it costs a lot of time. Our Carbon Cleaning Machine is high-tech. It needs only 20-30 minutes. It causes no harm to environment and the car engine.

The Principle of Carbon Cleaning Machine

Oxy-hydrogen carbon removal machine is a new type one. Water is the fuel, which electrolyses into oxygen and hydrogen. Hydrogen is the fuel while oxygen is the auxiliary.

The mixture of oxygen and hydrogen (called brown gas) has good ability to catalytic combustion. The flame caused by the brown gas is called oxyhydrogen flame. The oxy-hydrogen has properties of wall adhesion, catalytic and high temperature. When it is burning, it can burn the oil sludge attached in the wall inside in the engine, which generates water vapour and melts the oil sludge. It melts and burns the oil sludge at the same time. At last all discharge in the form of flowing liquid.

Steps of Using

One: before starting the machine, fill proper water into the machine and connect the output trachea of the machine with the intake manifold of the car.

Two: idle the car, push the start button

Three: Take a seat and wait about half an hour.

Detail Comparison with the other traditional methods

As you can see, our machine is far better than the other methods. Our machine cleans everywhere in the engine. Use our machine, your car engine will get a thorough cleanup.

Questions about the Oxyhydrogen Carbon Cleaning Machine

Is it Safe?

1. The raw material to clean the carbon is water, which is electrolysed into activate oxygen and hydrogen. No chemical, No Corrosivity. No harm to Oil Seal and Engine

2. After activated Oxy-hydrogen and petrol burns, it turns into water. The water contains the deposit and flew away through the exhaust pipe.

3. Without removing any part of your car engine( just connect the intake manifold)

4. No hurt to your engine oil after cleaning the carbon deposit(maintenance free)

How to tell the performance?

1. There are dirty water coming out of the exhaust pipe during the process

2. The accelerator becomes sensitive after cleaning

3. Acceleration is better

4. The effect of saving oil is obvious

5. The dark smoke in the exhaust pipe disappears

The technical parameters and pictures of our machine

Packing

We have our own factory. So we have strong ability to produce. We support OEM, so the price is as low as possible. Moreover, the using limit is 10 years.

Our factory portrait