SINOPOWER MACHINERY!toilet paper production machine/toilet paper machine/toilet paper making machine/ toilet paper machine price

Process Flow Diagram

Raw materials (waste paper)——pulper——vibrating sieve——pulp tank——pulp pump——bleach machine(thruster)——refiner machine——pulp tank——pulp pump——pressure sieve——pulp tank—— pulp pump——except sand machine——net box——cylinder——blanket——paper making machine——drying——roll paper——the big finished jumbo paper —— process machine

1.testliner paper board(rewinder machine——cutting paper machine——small roll paper)

2. carboard (plate paper slitting machine —— paper machine —— carboard paper )

3. tissue paper (plate paper slitting machine ——tissue paper machine ——tissue paper )

Dscription of the equipment:

Full-automatic towel paper production line is full-automatic production line, which composed of :

1 set of Full-automatic high-speed rewinding and perforated toilet paper and towel paper machine (it can be 2 sets according to requirement),

1 set of cutting machine,

1 set of multi-rolls packing machine and convey belts.

A: For paper width up to 2700mm to make bathroom tissue, kitchen towels. Equipped with variable perforation length system to satisfy any length need. The speed of this rewinder is up to 325m/min, 4 cycles per minute, including:

Two steel to rubber or steel to wool embossing units.

Two or three backstands, with a double or three belt driving system, for jumbo rolls up to 1500mm diameter, and with a pneumatic loading of jumbo roll system.

B:This Economical line will automatically change core and unload the finished products, and automatically trim and seal the tails of the logs, leaving a lip about 20mm to make it easy for consumers to start using the rolls without tearing the paper at the seal.

C:All the driven system to be by means of synchronous belts, nylon belts and gears, for years of free maintenance. Electrical eyes will be mounted on the different parts of the line to monitor the machine and stop it in case it runs out of paper, cores or any other unforeseen problems. The lubrication systems will be provided on the major parts of the line. D,The motor power is 7.5kW. Variable frequency control depending on the final specifications and requirements. E,This line is to be controlled by a PLC of your choice.

After sell service:

1,One-year maintenance service.Any damage spare part can be exchanged from our company directly

(excluding the easy damaged goods).

2, After one year,we will continue to assist you both on technical problem and the quality level for long-term

3, The easy damaged goods will be along with the machine.

Welcome To Establish And Develop Business Contacts.