Urine Analysis Strip URS-3

1. High quality test chemical reagent

2. Test chemical reagent accurate in results

3. Test chemical reagent specialized manufacture

4. Test chemical reagent fast delivery

5. Test chemical reagent OEM design welcome

Wancheng urinalysis strips are very resistant to interference from ascorbic acid (vitamin C). Some strips on the market are prone to vitamin C interference and give falsely-lower or false-negative results. The tests that are most affected are blood, glucose, bilirubin and nitrite.

1) Rapid Results 30 seconds to 2 minutes

3) High Quality Color Chart Superior European-produced color charts provide consistent, dependable readings

4) Flexible Available in up to 12 parameters

5) Cost Effective 25, 50, or 100 strips per bottle, with performance better than or equal to the current market leader at a much lower price

OEM service could be offered

Testing Item: Glucose pH Protein

Strips Dimension: 123±1(L) 5±0.2(W) 0.24-0.26(T) (mm)

This test is based on a sequential enzyme reaction. First, glucose oxidase catalyzes the formation of gluconic acid and hydrogen peroxide from the oxidation of glucose. A second enzyme, peroxidase, catalyzes the reaction of hydrogen peroxide with potassium iodide chromogen to oxidize the chromogen to colors ranging from blue through greenish-brown, and brown to dark-brown.

Reactivity of the test decreases as the specific gravity and/or pH of urine increases, and may also vary with temperature. Ascorbic acid (more than 50 mg/dl) and ketone bodies (more than 40 mg/dl) may cause a false negative result for a specimen containing a small amount of glucose (100 mg/dl). However, the combinations of such ketone levels and low glucose levels are metabolically improbable.

pH

This test is based on double indicators (methyl red and bromothymol blue), which give a broad range of colors covering the entire urinary pH range. Colors range from orange through greenish-yellow and green to blue.

This test indicates the pH values within the range of 5 to 8.5.

Certain drugs, such as those used for hypertension and heart diseases (acetazolamides) may cause an alkaline urine. Excessive urine on the test strip may wash the acid buffer from the neighboring protein reagent onto the pH area and change the pH reading to an acid pH although the urine being tested may originally have been neutral or alkaline. An accurate reading may be influenced by slight variations of pigments in the urine.

This test is based on the color change of the indicator tetrabromophenol blue. A positive reaction is indicated by a color change from yellow through green and then to greenish-blue.

The minimum sensitivity of this test is 10 mg/dl of protein in urine. Highly buffered alkaline urines (pH 9) may give false negative results. The interpretation of results is also difficult in turbid urine specimens.

Visual Reading technique:

Step 1: Remove a test strip, taking care not to touch the reaction fields.

Immediately close the container again.

This protects the remaining test strips from humidity and guarantees strip integrity up to the expiry date indicated.

Step 2: Dip the test strip for about 1 second into the fresh urine specimen. Wipe off any excess urine on the rim of the vessel and blot the edge of the test strip on tissue paper.

Step 3: Read the result by comparing the test fields with the color scale on the test pack after 30 to 60 seconds.

other company Changchun Wancheng Bio-Electron Co., Ltd