PTJ201-27 Home garage Two Post Car Parking lift

Location:
Qingdao, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:

Product Description

FAQ

Common faults and maintenance methods:

Questions

Reasons

Solutions

The platform doesn’t rise ,Motor turns, no leakage of hydraulic oil

Air in the hydraulic oil

Non-load lifting to the apex ,need keeping some seconds then falling, stopped when falling to the middle, opened the oil connection to exhaust, then tighten.

Low temperature made the hydraulic oil thickened

Anew replenish hydraulic oil

Overloaded

Check and confirm the lifting weight is less than the rated load

Leakage hydraulic oil in the place of tubing joint

Joint loose

Screw down

Joint was broken

Replace joint

Leakage hydraulic oil

Oil cylinder sealing ring was wear

Replace the oil cylinder and sealing ring

Motor do not turn

Motor burn out

Check and replace the motor

The voltage is too low

Check and confirm the voltage for voltage regulation

The fuse is bad

Replace fuse

Limit switch is broken

Replace limit switch

Platform is not falling

Platform in the lock state

Control the platform rise and unlock, then control it falling

The hydraulic oil is too thick

Replace hydraulic oil

Product Description

2 post car parking lift

Drawing:

Specifications

Name

Two Post Parking Lift

Model

PTJ 201-27

Dimension

4529*2560*3500mm

Weight of parking car

2700kg/ 5947lbs

Rated speed

2m/min

Lifting height

2100mm

Total height

3500mm

Size of vehicle loading pallet

4166*2100mm

Motor

2.2kw

Warming devices

Yes

Mode of operate

Button / IC card / Remote key

Mode of control

PLC control

Mode of drive

Hydraulic driving, chain balance

Electrics motor

380v,3 phase; 220v single phase

(by ordered)

Net weight

1150kgs

Advantage of PTJ 201-27

Protective device

a. anti-dropping device: to prevent the vehicle loading pallet from undersired disconnection

b. limited switch device: to prevent the equipment running

c. photoelectric switch (device for checking the entrance of people and vehicles): to prevent the people from accidently entering into the equipment under operation.

d. emergency switch: the emergency switch button is used to cut power off when there is anything abnormal during the equipment process.

2 .Oil cylinder

Used cylinder reversal, have many advantages, not distortion, dustproof.

Adopt Italy Aston Seal ring.

3. Adjusting lifting height, the maximum lifting height can be 2200mm. Usually, lifting height is 1900mm, 2000mm or 2100mm.

4. Lifting capacity can be 2700kgs

5. Structure all adopts layer cutting, attractive appearance, easy installation, less questions, easy maintenance.

6. Vehicle loading pellet is 2100mm,usually loading pallet is only 2000mm

Production Description:

This parking system is designed of two spaces of up and down as one unit. The bottom car can go in and out directly. When the upper space needs to park a car, the car in the bottom should be driven out;

It can be widely used in hotels, enterprises and public institutions and residential area. Column can be N+1 form, saving land area, full use of space, property rights;

Hydraulic drive, chain balancing device to ensure the balance both ends of rise and fall’;

Low noise, smooth operation, save energy, low carbon and environmental protection;

Vehicle loading pallet fully enclosed design, to avoid oil leakage, rain and snow

Polluting the lower vehicles;

Spraying plastics, high anti-corrosion ability, long life. Electrical and driving parts with waterproof characteristics;

Simple structure, easy installation, minimal requirements for civil engineering;

Packaging & Shipping

Company Information



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Qingdao Telian Machinery Co., Ltd.
Phone Number:
  86-0532-85135975
Fax Number:
 86-0532-885137949