TDP-1.5 Pill Press Machine For Sale With 1 Set Free Pill Punch Press Die

Brand new,Good quality Hot sell single punch tablet press one of the best single punch tablet press machine no special forms to fill out A powerful electric motor and can also be hand operated excellent,adaptable,easy to use,small size,light weight. EXPRESS MAIL SHIPPING with TRACKING NUMBER♣Introduction♣

A lot of the branded vitamin tablets on the high street have unnecessary additives and supplements that you just don’t need. This press allows you to mix the vitamins and supplements that you require for your exact diet and convert them into convenient pills.Maybe you are considering setting up a small business selling vitamin, weight loss or herbal tablets. If so this is the right press for you. It is able to produce up to 5400-6000 tablets per hour, using a maximum presser of 15KN. It will run for hours continuously producing identical tablets time after time, giving your business a professional look.

TDP-1.5 type tablet press,able to make powder and granular material compressed into acircular shaped tablet.Can be widely used in pharmaceutical,chemical plants,hospitals and scientific research units.The machine performance is excellent,adaptable,easy to use,easy maintenance,small size,light weight.Without electricity may could also be hand-pressed.A large pressure of tablet press machines,filling a large depth,thus the size range of tablet is large,able to adapt to the pharmaceutical industry to produce a variety of tablet medicine requirements and other industry requirements of produce similar products,deeply welcomed by customers of various industries.

♣Technical Parameters♣

Voltage	110V or 220V or customized
Maximum pressure	15kn
Maximum diameter	12mm
Maximum thickness	6mm
Output	4000-6000 pieces/h
Power	220V 550W,1400 rev/min
Dimension	570x380x630mm
Weight	70kg

♣Feature♣

This great little machine is designed for pressing tablets from various granular materials for use in pharmaceuticals,various chemicals,food products and a host of other uses. Typically it can be found in hospitals,science research institutions and is used for trial manufacturing in labs to produce small to medium production amounts of different kinds of tablets. Up to 6000 tablets per hour can be achieved. It features a small desktop type press, a powerful electric motor and can also be hand operated. The depth of the filling material, tablet pressure and thickness of the tablets is easily adjusted. This machine comes complete with 1 set of punch and die included.

Following are the TDP-1.5 single tablet press's amazing functions:

Able to make powder and granular material compressed into a circular shaped tabletCan be widely used in pharmaceutical,chemical plants,hospitals and scientific research unitsLarger Diameter Tablets up to 12mmPresses both Round and Irregular TabletsLarger Motor and Compression ForceAdaptable,easy to use,easy maintenance,small size,light weightIt will run for hours continuously producing identical tablets time after timeFriendly Support and Prompt ServicesNo special forms to fill outUp to 6000 tablets per hour can be achieved,using a maximum presser of 15KNA powerful electric motor and can also be hand operated

♣How to use♣

1.Before connected to electrical power,the motor should be connected to ground to ensure safety.First, demolition the V-belt,connected to electrical power,starting the motor,observe motor rotation direction whether correct(Motor shaft rotation direction should be with the protective cover or hand-wheel in the opposite direction of the arrow).If the rotation in the wrong direction,another separate cable connection.Then make V-belt installed.

2.Unloading punch dies and adjustment of tablet press. a,Installation punch dies.b,Putting out the adjustment. c,The adjustment of filling the depth(tablet weight adjusted). d,Pressure adjustment. e,die demolition.

♣Item Units and Pictures♣ What you will get 1 X Single punch tablet press machineOperation Manual will be sent by e-mail

♦FAQ♦

1.What I should do to choose the best machine for us?

Answer:1)Tell me the diameter of the tablet you'd like to press.

2)Tell me the production capacity you need for the machine.

3)Tell me if you'd like to adjust the voltage

2.If there's some spare parts broke,how to solve the problem?

Answer:First of all,please take the pic or make a video to show the problem parts.

After the problem is confirm from our sides,we'll send you the spare parts for free

but the back shipping cost should be paid by your side.

3.Could we print logo on the mold/dies?

Answer:Yes,just send us the design of the mold and we'll do the customize of the mold for you.
♦About Us♦

1. 30 years of experience of producing tablet press,rotary tablet press,coating machine,granulating machine,mixing machine,pill maker etc pharmaceutical machines.

2. 10 Professional engineers plus 50 workers.

3. Provide high quality products of low prices plus sincere after-sale service.

4. Provide spare parts for free and 1 year warranty.