flotation machine

flotation system has a lead position in the flotation of metallic and other minerals. The SF flotation machine is the latest design concept and combines the benefits of circular cells with the unique features of the mechanism to create the ideal conditions to maximise flotation performance for all roughing, cleaning and scavenging duties.
Dingke Minerals offers the full range of cell volumes required for modern ore processing plants with cell sizes from 0.37 to 16 m3
Features
This product is a kind of flotation machine with powerful agitating force improved on the basis of SF flotation machine, suitable for the separation of minerals with larger specific gravity like iron ore, with the following features: a frothing plate is added on the basis of SFflotation machine; centrifugal impeller is adopted, which has enormous agitating force.

Notes for Selection
While placing your order, in addition to specifying the model and quantity, make sure to provide the flotation circuit and the followings:

Quantities of feeding chambers, intermediate chambers, and crude ore chambers;

Other special requirements;
No electric control cabinet will be supplied.
The flashboard will be made according to the manufacturer’s drawings. And the electric driven flashboard will be adopted for largescale flotation machine.

Working Principle of Flotation machine
When flotation machine works, slurry is inhaled from the bottom of the trough to the space between impellers. Meanwhile, the low_pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re_mis with air. The remained slurry flows to the next trough until becomes residue.

Technical Parameters of Flotation machine :