ZIFINE Anodizing rectifierProduct Description

FEATURES

♦ Energy efficient: the operating efficiency of the power made by our company can all reach85% and above. Comparing to thyristor supply, it can save the energy for 20%.

♦ Advanced technology and high quality: our high-frequency switch power ad opts Pulse width modulation circuit( PWM ) as the control circuit. The main circuit ado pts the imported world famous IGBT power modules. We also adop t the full bridge conversing technology. Our producing techniques and product testing was strictly enforced the system of ISO9001:2008.

♦ Full and reliable protection:our high-frequency switch power has over- heat,over-current, short circuit and open phase protection. Thus can avoid the damage caused by the external factors.

♦ Simple and easy to use: the users don't need to adjust the output voltage and the output current. It has the function of stable voltage and steady flow switching. The users can adjust the electric current and the operating mode of the power according to the size of the work piece and the technique requirements.

♦ Rational construction and easy to maitain: our product is forcedly air-cooled. Power and control parts are sealed. The surface of the engine box is powder coated. Because all of these, our power can be used for a long time even under the severe environment.

Parameters of Anodizing rectifier

Item	Parameters
Output rating voltage	DC 0 - ± 2 4V
Output rating electric	0 - 1 0 0 A
Input rating voltage	AC 3 8 0 V±1 5 % 60 HZ
Modulation form	PWM
Converse frequency	20KHZ ( ±2 KHZ )
Output voltage	The precision of stable electr ic <1 %( the average rate)
Output modulation	Voltage and electric are beginning with zero
Operation style	Stable voltage and steady flow should be in a succession of operation
Working style	It can work beyond the rating burden
Cooling form	Wind in nature
Prevention function	Keep away from over-heat, over-current and over- pressure, etc.

Products range

ZF-600A-12V, ZF-3000A-18V, ZF-3000A-12V, ZF-3000A-6V, ZF-1000A-6V, ZF-15000A-12V
ZF-300A-12V, ZF-4000A-18V, ZF-4000A-12V, ZF-4000A-6V, ZF-1500A-6V, ZF-1000A-18V
ZF-500A-12V, ZF-5000A-18V, ZF-5000A-12V, ZF-5000A-6V, ZF-2000A-6V, ZF-1500A-18V
ZF-1500A-12V, ZF-6000A-18V, ZF-6000A-12V, ZF-6000A-6V, ZF-15000A-6V, ZF-2000A-18V
ZF-300A-6V, ZF-8000A-18V, ZF-8000A-12V, ZF-8000A-6V, ZF-1000A-12V, ZF-15000A-18V
ZF-500A-6V, ZF-10000A-18V, ZF-10000A-12V, ZF-10000A-6V, ZF-1500A-12V, ZF-1500A-24V
ZF-1500A-32V, ZF-12000A-18V, ZF-12000A-12V, ZF-12000A-6V, ZF-2000A-12V, ZF-1500A-24V

Our Services

Shipment: Air transportation - DHL, TNT, UPS, Fedex, etc. Sea transportation is also available.

Package: Wood cases.

Warranty: 360 days warranty.Our warranty does not extend to any products that are physically damaged or products that have not been used under normal operating conditions.

Delivery time: Deliver within 1-3 days after receiving your payment.

Import customs tax is buyer’s responsibility.

Pictures of Anodizing rectifier

Company Information

FAQ

1. How to choose voltage

The choosing rated output voltage should be fit to the technology. If voltage is low or high, it can't meet the technology; other wise, it will waste the energy and operation efficiency, further more coefficient of gripe can be too high and give imp act on the quality of electroplate.

2. Rating output current
The choosing rated output current should be fit to the technology, with consider ation of the plating tank's size, temperature, chroma, density and also the quantity of electroplate.

3. Selection of the output of wave
Special technique of electroplating require the output of wave, the different waves of output are correspoding to the use of electroplating.

4. Selection of operating efficiency
The operating efficiency of the power determined the output current and efficiency of input. In the processing of electroplating, you have chosen the high efficiency of power.

If you need more support, please feel free to contact with us, we will be of your service anytime!