UV-9630 UV curable doming resin with crystal clear and rigid smooth surface

UV-9630 crystal doming resin (soft)

UV-9630 doming resin has good optical transparency and smooth light.The product is not easy to bad and shelf life is long. It has strong stick relay with glass, metal, hard plastic, fabric etc.

This product is under uv irradiation (300-400mm), it is curing state after a few second several minutes.

Technical index:

Main application:

The product can be used for the nameplate plastic crystal decoration, trademarks, decorations, soft drop encapsulation.

Packaging, storage and transportation:

Plastic package 30 ml/ barrel. Storage period is 6-12 months.

The UV glue use guidelines:

1.First please clean need bonding object's surface, and keep dry.

2.You need to put the UV glue on one of the surface,and fold two plane, then use suitable wavelength (365 nm) and energy of ultraviolet lamp or high pressure mercury to exposure.When light from the central to the surrounding, and make sure the light can really shone through to agglutinate place.

3.The initial position,need about 6 seconds under the light, then please remove workpieces residual glue and light again to fully cure.

4.Curing time should be according to the different preparation material, adhesive thickness, ultraviolet intensity varies from one of the. Suggest user to purchase ultraviolet strength tester, bonding the first light intensity test in order to reduce scrap rate.

5.The temperature is have a little effect on the activity of glue, low temperature curing time should be extended appropriately.

6.Operation should not be used when the force extrusion and repeated friction bonding material, and it is recommended to use a fixed tool.

7. Plastic glue, plastic should be considered in the content of uv absorber, high content will seriously affect the uv transmittance, thus has obvious influence on the curing efficiency of glue, glue can't even curing.

8.Advice when large adhesive with low viscosity products. With the condition of cases, the best vacuum equipment purchase, joint in the vacuum environment, to remove air bubbles and improve yield.

9.The above instructions are for reference only, specific operation to customers according to the specific circumstances make appropriate adjustments. The UV glue use guidelines.