•

•

Scope

This retort food processing machinery is for canned food ,sterilizing jar, sterilizer for glass jars ,soft packaging , retort pouches, glass autoclave, plastic package , can boiler ect.

Characteristic
1. automatic control
2.The spraying water mist will be full of the whole chamber space with an uniform temperature distribution inside this retort food processing machinery

.
3.this retort food processing machinery is equipped with high-efficiency heat exchanger, which will be able to increase and drop the temperature of spraying mist rapidly and smoothly.
4.effective water circulation pump can save power for maximum effect, power will be saved 27% than the same machine
5 . in this machine, Cooling water can be used repeatedly time after time, no special demand for cooling water quality, tap water or well water available with this autoclave

6.PLC touch screen automatic control is applied in this machine to go through the whole process . balanced pressure from the air compressor is applie to insure no deformed processing package
7. this autoclaver has Steam autoclave and Electric autoclave two types. Steam autoclave need a boiler and electric heating do not need boiler
8. the machine has 1 years warranty, there is manual to direct the retorting process
9. horizontal type and verticl type is available with us.
10. the water in this retort sterilizer can be recycle, which is very energy efficient for several batches.

4.Basic Function
1. PLC program control automatically,Touch screen data set up is applied in this retort sterilizer.
2. whole retorting process log is available tem/pressure/time in electronic form or printer
3. overtime of retort sterilization is alarmed.
4. Electronics, mechanical mode safety interlock to insure the retort process
5. Electronics, mechanical overpressure protection is available with the sterilization.
6.
7.over temperature alarm.
8. over pressure alarm.
9.low Water level alarm.
10.breakdown alarm.
11. air outlet sound absorber.
12. multi step control, each step adjustable in temperature, pressure and time
13. multi programme memory
14. Electronic temperature deviation correction.
15. temperature distribution tolerance within ±0.3°C. process monitoring

size and weight