machine for making wood pellets

Brief introduction of machine for making wood pellets:

1. Machine for making wood pellets is based on circular motion, electric power to driven, driven by the moter, rotation of pressing stick, produce temperature between pressure stick and particles, power material through high temperature gelatinization, it can discharge from the bores under the extrusion effect of the pressure stick.

2. Machine for making wood pellet is for pressing all kinds of bio-mass material to be solid pellets which is for burning fuel or animal feeding. It is ideal pellet machine for personal, family and small plants due to easy operation and maintenance.

3. Energy saving, low noise, reasonable structure equipment with elegance appearance. The performance of the machine is stable and the operation is easy to handle.

4. Machine for making wood pellet is able to be widely used in pelletizing wood, sawdust, crop straw (rice straw, wheat straw, corn stalks, sorghum stalk, soybean stalk, cotton stalk, grape straw, peanut seedlings, and sunflower stalk), rice husk, grass, shrubs, branches, wood cut-off head, bamboo debris, bagasse and the like.

5. The pellets made by pellet machine are uniform and smooth, the diameter is 3-12mm, length is 3-60mm. High density, convenient for transportation.

6. Using powder feed directly, without adding water, granulation can be carried out. The moisture of pellets is smaller and more conducive for storage.

Working process of machine for making wood pellet:

The DZLP series machine for making wood pellet uses the motor as driving force for initiative axis, and operate cyclic. Major axis and rollers are driven by gear wheels to produce the friction with flat die, the resulting friction temperature (between pressure roller and the die) can reach 80°C. The powder material become paste at high temperature and is condensed into pieces, then go through the hole on the flat die. The high-quality forming pellets will be rolling out from the exit of machines under the role of the pressure roller. At the same time, the length of pellets can adjust according to location of the cutter segment.

Finished feed pellets characteristics:

1. The pellets produced are low moisture content less than 10%, high density, clean, easy to handle and consistent size.

2. In additon, the diameter of pellets can be adjusted by changing the mould of the machine. If you want to produce 3mm pellets of diameter, you can make it by changing the moulder of 3mm diameter.

Parameter of machine for making wood pellet:

Notes:
If you're interested in our products, please don't hesitate to list :
1.what are the raw material?

2.the moisture and the size of raw materials?
3.output capacity per hour you demand?
4.your service voltage?

Then we will be able to provide you the right machine and service soon. Thank you very much!

Photos of machine for making wood pellets:

Spare parts characristics of machine for making wood pellet:

1) Vertical feeding directly in place.

2) Die static, roller rotating, materials centrifugal, evenly distributed around.

3) Parameter dies, up and down dual-use, reduce the cost, enhance the efficiency, can be dual-use, high capacity, energy saving.

4) Different hole diameters, with different specifications to pelletize.

5) Macroporous die, wire joining circular tube, increasing travel, improving density.

Welcome to contact me for further communication!

1) The minimal quantity per order: 1 set.

2) Payment: T/T. 30% amount is as the deposit , the balance is paid before delivery.

3) Delivery time: Within 7-30 days after receipting of the deposit.

4) Warranty time: in 12 months except for spare parts and bearings.

Related machines:

Other machine for making wood pellet: