photoluminescent pigment/glow in dark powder/luminous pigment

Product Quick Details:

Introduction related:

Truth-Chem can supply the photoluminescent pigment to use in injection mould industry, with the best character such as soft pigment, fast light-absorption, low level granularity, and high level brightness, we can resolve the problem that the pigments become nigrescence during the procesee of injection basically.

On the other hand, to avoid the nigrescent problem of pigment during injection, Truth-Chem would give customers more suggestion as below:

For the photoluminescent pigment, the customers should choose the soft and low-level granularity one.

For the machine, the customers should choose old and short screw (0.8 m was preferred) one.

Manual re-mix the pigments preferred, avoid to use the machine.

During the injection mould, try the best to lower the temperature and pressure.

Final add percentage of the pigments during the injection mould usually were 3%-10%, customers can use the difference percentage base on the luminous level and cost, but suggest the percentage not more than 10%.

The relevant pigments were below:

Notes:

◊The red one should be made to order.

◊ The above model had been tested best for plastic, but before use in batch, we suggest to test first because of difference circumstance and equipments.

If nigrescence still exist, we suggest to choose Juliang master batch such as ABS, PP, PS, PC, HDPE.

Truth-Chem can provide difference size of waterborne luminous pigments according to customer’s requirements; the current products were as below:

Specifications:

We own factory ourselves which has been specializing in researching, developing and producing photoluminescent materials and auxiliary products for ten years.

Based on our advanced manufacture line and special techniques, Truth-Chem photoluminescent materials were no poison, no harm and no pollution, also it can reach steady physical and chemical functions. As one high-tech enterprise, we had built quality management system and passed the inspection by the SGS. Now Truth-Chem photoluminescent materials were widely used in construction decoration, traffic and transportation, military devices, fire protection, industry, daily commodity and craftworks and other related industries.

The common long-effect luminous pigment can be resolved when used in waterborne coatings or painting, ink, so it will stop luminous after one day.

Our technology resolve the problem perfectly, after hundreds of test, Truth-Chem covers the special inert deposits outside of luminous pigment with special technology, the waterborne coating can be separated with luminous pigment, so the luminous pigment cannot direct contact the water and will not resolved, the luminous can be kept for long time.

Our Advantages :

1) After absorbing ultraviolet light and other varieties of visible lights,it can glow for more than 12 hours in the dark;

2) Non-toxic,non-radioactive and harmless;

3)The brightness and afterglow time are more tens times as those traditional zinc sulfide pigment;

4) Compare to the other photoluminescent pigments on the present market,the most salient characteristic of Truth-chem's photoluminescents pigments are that they charge light much faster and their afterglow level are also very good;

5) they have excellent stability and weatherability. The process of excitation and emission can be repeated forever

Contrast of product in day and night:

Our factory show:

If you have any question please don't hesitate to contact us!