Eliminator is deducted the hot humid air from the midst of the small droplets drift in cooling Towers,

to avoid things around the environment pollution and icy water mist, water saving and environment

protection device.

It is consisted by all sorts of arc and bracket or span card, tie rod, nut and washer.

Drift Eliminator has corrosion resistance, much bove gather water effect is good an so on .

For Cross flow cooling tower applications, the almost vertical water conduits provided by the

CD100 drift eliminator remove the water droplets out of the drift eliminator area and return them

back into the tower and does not allow any reentry. The special locking pin arrangement for CD

100 facilitates quick and simple assembly at site.

For Counter flow applications, the CDS130 drift eliminator provides a cellular rugged structure

with a very low pressure drop. This results in high drift elimination efficiency while exerting minimum

driving force on the fan. The CDS130 drift eliminators get an Sshaped tubular structure as a result of

their fabrication. Individual Sshaped corrugated sheets are bonded with subsequent layers to create

the structure. The entire area is thus divided into several fine S shaped mini zones each removing

water droplets on the entire surface of the cell.

No

Item

Unit

Index

1

MPa

≥43

2

Elongation at break

%

≥30

3

Impact strength

KJ/m2

≥3.46

4

Distortion temperature

°C

≥65

5

Oxygen index

≥40