Mitsubishi ASX LED Daytime Running Light LED automobile rear lamp with optical

Location:
Taizhou, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:

Product Description

Taizhou Carbo Auto Parts Co.,Ltd is professional make auto parts mould and produce the final parts in Zhejiang China.

Thank you very much for your visit to our website,Pls check our website and contact with us to get more infromation.

Product Description

LED Daytime Running Light For Mitsubishi ASX

The main parameters and other instructions:

1.Unique, Fashion design; Lastest LED color.

2. Whole aluminum housing, good heat dissipation,Make sure the lamp is more stable and long life-span.

3. With high power LED chips. 1Watt/chip, Luminous efficacy is over 100lm/W. High brightless and energy saving.

4. Reverse polarity protection function.

5. Waterproof (IP65), shockproof.

6. Compact, delicate, easy to install, with 4 screws and 4 nuts, almost can be suitable for all auto.

7. Professional built-in constant current driver, Make sure the lamp is more stable and long life-span.

8. Light source color: white (pure white and warm white), blue, green, red are availably

Specification:

1.chip sensor:5050

2.LED:9pcs

3.power:1w

4.waterproof:IP68

5. Color temperature: 6000K-7000K each LED bulb

6. Center Luminous Intensity >400CD

7. Lifetime: over 50,000 hours.

8. Working temperature: -35°C to 45°C.

9. Maximum surface temperaturea: ≤60°C.

10. Luminous Flux: ≥480lm.11, We accept OEM order

11. Warranty: 15 Months(Used in normal condition).

Install Tips:

1: Installation is straightforward, stick on or bolt on directly

2: Installation requires to take out screws, special tools are not needed

3: Installation requires some common tools,but installation is just bolt on directly

4: Installation requires some knowledge about the car parts, wire connection or engine

5: In order to install right and work properly, professional installation is needed

IIIustration A: Without switch:connect the wires with the car power directly,when the car is started,LED light work,when the headlamp is turned on,LED light stop working automatically.

IIIustration B: With siwtch,in this situation,it works all the same as the normal fog lamp,you can use the switch to control the LED light,turn on and turn off.

Welcome to contact with us,Thanks again.Shake Hands.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Taizhou Huangyan Carbo Auto Parts Co., Ltd.
Phone Number:
  00-576-84267598
Fax Number: