Product name:

1.Grade: Y10T, Y20, Y25, Y30, Y30BH, Y35 and etc.

2.Shape: Disc, Cylinder, Block, Ring, Countersunk, Segment, Trapezoid, Irregular shapes and more. Customized Design (Design proper magnets for clients specific requirements)

3.Sorts: We have Disc Ferrite Magnets, Segment Ferrite Magnets, Ring Ferrite Magnets, Block Ferrite Magnets, Cylinder Ferrite Magnets, Irregular Ferrite Magnets, Sintered Ferrite Magnets, Bonded Ferrite Magnets and many other series.

4.Application:Widely used in ammeter,speaker,audio,phone,TV,dynamo,etc.

ferrite magnet are manufactured by pressing, sintering, or injection molding. These magnets can be both anisotropic and isotropic. Anisotropic grades are oriented in the manufacturing direction and must be magnetized in the direction of orientation. Isotropic grades are not oriented and can be magnetized in any direction.

The chemical composition is SrO-6(Fe2O3), strontium hexaferrite. The raw materials used to produce ferrite magnets are strontium carbonate and iron oxide both of which are readily available and low in cost. As a result, the use of ferrite magnets in most applications is more economical than other materials.

Advantage
1.Cheapest magnet material
2. Good anti-corrosion performance, no surface treatment needed
3.Excellent temperature stability
4.Compact crystal
5.Could provide isotropic and anisotrpic

Two manufacturing Process
1.Dry process: By dry process, can produce isotropic & anisotropic magnets;the tool can be changed and developed easily.
2.Wet process: By wet process, only anisotropic magnets can be produced;it is complicated to change the tool and the tooling charge is much higher

Magnetization
1.Isotropic ferrite magnets are not oriented and can be magnetized in any direction;
2.Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.

Attributes

1. Least expensive material compared to alnico and rare earth magnets
2. High intrinsic coercive force
3. Available in simple shapes only due to manufacturing process
4. Lower service temperature than alnico, greater than rare earth
5. Finishing requires diamond cutting or grinding wheel
6. Lower energy product than alnico and rare earth magnets
7. Most common grades of ceramic are 1, 5 and 8 (1-8 possible)
8. Grade 8 is the strongest ceramic material available
9. Tooling can be expensive

Transportation

All available shipping ways could be applied, by courier, by air or by sea.

Appointed shipping company or our own forwarders all could be used in shipment.

Full-way tracking the goods for you before the goods arrive.

Buyer Guide

In order to quote you the best price quickly, please provide the following information:

1.Product size,grade,etc.

2.Order quantity;

3.Attached the drawings if customized
4.Any special packing or other requirements

OUR FACTORY MAGNET AND PROPERTIES CHARTS