BGA solder rework accessories Arctic Silver 5 High-Density Polysynthetic Silver Thermal Compound 3.5g Tube

Arctic Silver 5 High-Density Polysynthetic Silver Thermal Compound 3.5g Tube

Arctic Silver 5 Silver Thermal Grease 3.5g

Silver powder with 99 to manufacture, use three different shapes and sizes of pure silver powder made, not power, easy to use, does not dry up, there is no parity of the Xi.

Components: the proportion is over 88% of silver powder, the other a small amount of Ceramique
Net Weight: 3.5g (1cc)
Important Note:
Arctic Silver 5 needs at least 200 hours, so that particles larger contact area between the CPU and heat sink for better cooling (no fan or the fan switch if slowly, this cycle will be longer) CPU's temperature will drop more 2-5 degrees when after the "break-in" process. "break-in" in the usual computer will automatically.

Specifications:

Thermal Conductance:
> 350,000 W/m2 ° C (0.001 inch layer)

Thermal Resistance:
<0.0045 ° C-in2/Watt (0.001 inch layer)

Average Particle Size:
<0.49 microns <0.000020 inch

Extended Temperature Limits:
Peak: -50 ° C to> 180 ° C Long-Term: -50 ° C to 130 ° C

Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

Coverage Area:
Arctic Silver 5 is sold in 3.5 gram and 12 gram tubes. The 3.5 gram tube contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003 "thick, the 3.5 gram tube will cover approximately 16 square inches.

Caution:
We do not recommend using Arctic Silver 5 on the older slot type Intel Xeon processors with large multiple square inch CPU to heatsink interfaces. The huge contact area and large gaps between the processor and the heatsink require a thermal pad or thick mesh-reinforced paste. Arctic Silver 5 can be used on socket type Xeons without a problem.