Product Introduction

e

Outstanding Advantages

/ What you can

1) Fuel saving 10%-30%

Increasing the cylinder impermeability & fuel combustion rate to improve working efficiency of equipment.

Energy saving is 10%- 15% for the small car and 20% - 30% for large vehicles & heavy machinery.

2) Engine oil saving 50%

Improving the lubrication performance, enhancing the pressure resistance of the oil package, prolonging 1-2 times of service life of lubricating oil.

3)Super Seal Performance

Sealing up engine cylinder----restore cylinder declining caused by normal friction and increase the value to 95-98% of the normal value ,also avoiding the "oil burning" phenomenon caused by un-tight sealing of the cylinder.

4)Protection

Protecting the engine, prolonging the service life of the engine, and reducing the maintenance costs. The sealant is made of nano-scale particles, which can inlay firmly into the inner surface of the engine, and promptly form a layer of protection in the inner wall of bearing, and it can also reduce the run-in period of new vehicle effectively.

5)Repair

Repairing the dents and cracks caused by normal abrasion on the inner surface of automobile engines.

6)Emission Reduction 50%(Environmental)

The product can reduce carbon deposit inside the engine and avoid the "oil burning" phenomenon caused by un-tight sealing of the cylinder. 5 50-80% of exhaust emission is decreased, reducing environmental pollution.

7)Easy and safe to use.

Operating Principle

This product uses ingredient "component atom" control technology, changing "multi-component" materials into the "atomic cluster" structure, and producing this material into a fluid. It can fill in the dents and cracks caused by normal abrasion in the cylinder, forming a protective film on the inner wall of the engine to make a new surface, properly repairing the engine, enhancing the cylinder impermeability.

Usage methods

1.Take off the top seal of the package hold the fingerprint area with your left hand, align to the engine oil filling port, and add the additive into the enging with your right hand in the arrow direction.

2. Start up the engine for 3 to 5 minutes after the additive was added into the engine, allowing intensive mixture of this product with lubricating oil inside the engine body.

3. Use this product in proportion at every time of lubricating oil changing.(10g for each liter of lubricating oil).

FAQ

1.This product can only be added into the engine oil box of automobile engines, and mixed with lubricating oil for applica-tions. Please do not add it into the fuel box.

2. Keep in cool, dry and ventilated places.

3. Best lubricant oil additives for internal combustion engine.