X-Ray Detection Tech high standard waste tyre recycling to oil plant without pollution --Bring money for you!

1.The main raw material is waste tire&plastic scrap which is easily available find.

2.100%wastage recycling is achieved.

3.No chemical ingredients are used in process.

4.During and after process,no soil,water,and air pollution.

5.Get valuable output from waste:fuel oil,carbon black,steel wire and gas.They are more demanding in the market.

6.The process can be applied to all rubber based materials.

7.It is feasible in technology with small amount of investment,high availability of materials,short recovery period and

with bright future,is the ideal choice of investing.

8.Each recycled ton of tires preserves 10 tons of CO2 is a major green house gas.

Waste tyre recycling to oil plant--Raw material

Waste tyre recycling to oil plant--Introduce

Day by day,waste tire,waste plastic ,waste rubber,waste oil cause serious environmental pollution.Most people have no idea about

how to dispose of these house waste or industry waste.Burning,landfill,actually are not the right way tosolve the problem.We have

the honor to introduce you the green technology for waste recycling.

Waste tyre recycling to oil plant,also named as pyrolysis equipment.

Waste engine oil recycling machine,oil residue recycling machine,also named as distillation equipment.

After being processed,all the tire or plastic will be fully recycled,most percent are turned into fuel oil,the others are carbon black and

fuel gas.It doesn't cause secondary pollution.

Meanwhile at most area of the world,the cost of raw material is very low.Because actually they are waste things.People are willing to cooperate with you as waste management.After recycling these waste things are turned into treasure.

Waste tyre recycling to oil plant--Working process

1.Make reactor rotate clockwise 0.4r/min,put raw material into reactor,close feeding door.

2.Burned the fuel material(coal,wood,natural gas or oil)in the furnace.Reactor will be slowly heated,when the temperature reach around 180°C,oil gas will come out,then go to cooling system and get liquid oil.Some incondensable gas which can't cool down will be lead to furnace through a gas pipe.It will be used to heat reactor which can save your energy.Only the first 2 hours use energy for heating.After the first 2 hours mainly used gas,little energy is OK.After pyrolysis,all the oil gas come out from reactor,the temperature will fall down.Then make it rotate anticlockwise,carbon black discharging begin.

3.When the temperature reduce to 50°C,worker can opened the door of reactor take steel wire out.

4.And then you can start the next batch,

Waste tyre recycling to oil plant--main parts

Auto feeder:1. Made by Q245R boiler plate 2. Auto-welding both inside and outside 3. With rock wool insulation board

Reactor:1. 50 ton hydraulic pressure 2. Can feed all types of materials 3. Save labor and save time

Catalyst chamber:1. improve oil yield and oil quality 2. Reduce the speed of oil gas so that it can be better cooled

Oil-water separator:1. Separate oil and water 2. Collect heavy oil 3. Water sealing design keep safety

Condenser:1. The oil gas is cooled separately by small pipes inside condenser 2. Light oil is collected here

Vacuum device:Keep machine running under normal pressure

Anti-back fire device:1. Recycle residual gas to furnace as fuel 2. Water sealing design prevent tempering

Dust removal device:Dispose of flue gas caused by using coal, wood, oil or natural gas.

Waste tyre recycling to oil plant--technical data

Note:This is only one of our model,we could accept your special request.

Waste tyre recycling to oil plant--End products

Application of the end products :The fuel oil from the waste tyre recycling to oil plant can be used for heating.

For example, it can used in power plant factory,glass factory cement factory ,ceramic factory, aluminum factory,boiler factory,central heating factory ,painting factory,etc.The carbon black from the waste tyre recycling to oil plant can used in

electric cable jacketing ,conveyor ban,hose and door mat black nylon bag ,automatic spare parts and so on .The steel from waste tyre recycling to oil plant can sell directly.

Take one batch 10T waste tyre recycling to oil plant for example:

1. Crude oil: 45%*10t=4.5t
2. Carbon black: 35%*10t=3.5t
3. Steel wire: 13%*10t=1.3t

Waste tyre recycling to oil plant--Detailed pictures

As we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important

thing.Besides, security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact

rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

Waste tyre recycling to oil plant--Insurrance

All of our machine have the insurrance of Bohai Insurrance Property Co.,Ltd.It means if you buy our machine,you also

bought the insurrance for your machine.We could reduce your risk of the investment,the following is our company insurrance certification.It is so important for our customers!

One 40FR and one 40HR is ok.

Waste tyre recycling to oil plant--Service

1.Professional and detailed product introdution for you,such as photos,price,techical data,payment,delivery time,shippmentetc.

2.We have running machine in our factory,welcome to visit our factory.Let our customer know more details about our machine and factory.

3.The delivery time generrally 20 working days,if our customer really urgent,our workers could work extral hours,we will try our best to short the delivery time for you.

4.After bought our machine,we could supply 1 year warranty.During the time any question our engneers will help you solve the problem at the first time.

5.Our engineers will install for you,and provide the detailed training until the machine comission successfully.

If you want to know more about our waste tyre recycling to oil plant,looking forward to visiting our factory!