Polycarboxylic Superplasticizer

Product Description
PC admixture is a new type Superplasticizer developed primarily for applying in hot climate area. It contains polycarboxylate ether polymers,it has excellent high water reducing rate and significantly reduces slump loss. This product without any pollution to the environment, is a new type of environment-friendly high performance water-reducer.
PC admixture applies in all kinds of cement concretes which design for the need to increase the
initial compressive strength and ultimate compression strength,Includes as follows :
Less dosage of water in the cement concrete.
Fast mixing cement of cement concrete.
High flowability cement concrete
Highly durable cement concrete
Ready-mixed cement concrete
Mass cement concrete
Long distance transport cement concrete
Pumped cement concrete
Hot weather pouring cement concrete
Self compacted cement concrete

Main Properties and Characteristics

High water-reducing performance	High initial and ultimate strength. Low permeability, high durability concrete.
High flowability	Ease of placing and compaction. No separation.
Superior compression performance	No retempering. Ease of point construction
Low shrinkage and creep	Improves dimensional stability. Reduces risk of cracks
Good cohesion	Ease of pumping. No bleeding.
Good workability	Excellent appearance. Self compacted concrete.
Minimal water-bleeding	It is significantly less than BNS based products. Excellent concrete quality.
High elastic modulus	Superior load bearing capacity.

Main Features
The product has excellent retarding effect: according to the project requirements, can delay cement setting time of 2-36 hours, and basic synchronization delay initial setting and final setting time, Can make the ready-mixed concrete suitable for long distance transportation.
The product water reducing rate is as high as 25% to 40%, and to improve the concrete easy integration, helps to improve flow and dense concrete, improve the permeability resistance and other mechanical properties and durability.
Under the same slump and same strength condition, use this product can save the cement consumption 25% - 25%, can obviously reduce the project cost.

Standards
PC admixture is free of chloride and has been formulated to comply with ASTM C494 for Type A&F admixtures, BS5075 for high range water-reducing admixtures and JIA A6204 concrete. Also, PC admixture is complying with BSEN 934-2 Tables 3.1 & Tables 3.2,Chinese state Standard GB- 8076-97 and Chinese Construct Standards JG/T 223-2007.It is compatible with all Portland cements that meet recognized international standards.

Typical performance
PC admixture can significantly improve the strength of concrete initial setting and final setting. It also improves superior compression performance and workability of the concrete more than traditional superplasticizer.

Properties and Adding

Supply form:	Liquid
Color:	Yellowish color
Specific Gravity:	1.15-1.17kg/ltr@25°C
PH:	1.0-4.0
Solid Content:	50%
Chloride content:	<0.1%

Compatibility
Do not use other water reducing materials and /or superplasticizer in the mix with PC
Application
PC admixture can be added into the mixing water or to the wet concrete after the mixing water has been added. The time of adding PC to the dry concrete mix is not less than 100 seconds. A separate dispenser and feed line must be used in order to make the concrete reach the best property and the most water-reducing effect. Consider PC is one kind mother liquild admixture with high solid content, so we advise that the user dilute it into working liquild dilution with solid content of 15%--25% before mixing construction. Considering PC mother liquid is a kind of high solid content, if direct use mother liquor of high solid content,( solid content is more than 40%) can lead to initial setting time shortened, or lead to concrete in conveying pipe flow, resistance pump. So we recommend that users before using PC mother liquid will be diluted with water purification into working liquid, the solid content of working liquid suggested that between 15% - 20%.

Dosage
In order to meet specific requirements, The optimum content of PC admixture should according to the use of gelled material, aggregate, and the construction of environmental conditions (temperature humidity) test to determine. PC addition rate should be determined according to the materials and the conditions of the experiments and the water-reducing request. The scope of the PC addition rate is from 0.3 liter to 1.5 liter/100 kg cement materials.
Other dosages may also depend on the specific working conditions.

Packaging & Shipping

Packaging

Adopting international standard square plastic drums. 1000 liter/drum.

Shelf life
The best storage temperature of PC admixture is 25°C, the original sealed barrel storage life for 12 months. Finished product warehouses should be ground clean, cool and ventilated, the goods must be far away from the fire source of heat. Do not place the product exposure in the sun or rain. The goods must be packed neatly, General square plastic drums packed height is limited to two layers. Light discharge when handling to prevent damage to the packing.
In the temperature of 25°C to 50°C, PC admixture which be packed into original seal drum, can be stored in 9 months. If winter freeze occurs under 0°C, thawed gently restorable, does not affect the normal use of products.
Precautions
Health: PC does not contain any hazardous substances requiring labeling.
It is safe for use with standard precautions followed in the construction industry, such as
use of hand gloves, safety goggles, etc.
PC is a kind of water-based products, belong to no fuel. No corrosion to steel.

Our Services

Excellent Services
1.We can offer the Free sample to our buyer to test.
2.Welcome our buyer to visit our factory at any time.

Company Information

Our company
CHINA OVERSEAS SCIENCE & TRADE CO.,LTD(referred as COSTCO) is a science, industrial enterprise registered in Beijing, 2003. It is a member of China Construction Structure Association and China Concrete Admixture Association. We already successfully obtained the dangerous chemicals license issued by the Beijing Municipal Government as well as exclusive import-export rights issued by the Chinese Ministry of Commerce, the independent customs inspection issued by the China Entry-Exit Inspection and Quarantine.

FAQ

Notice
1. About the payment
We would like to use the T/T OR L/C at sight.
2.Sample Freight
We can offer the free sample to our buyer, but they need to chage for the freight. Once we sign the contract, we will cut this from the order. Hope you can understand.

3.Keywords

Polycarboxylic Superplasticizer

Our company picture