30W small system works with 30W PV panels to charge 12V/35A gel battery, and output DC power. Max output power is 30W.

Small system applied to unelectrified area for lighting, low power fans and etc., like mountain area, camping.

DC input / output, no inverter.

USB connector, for electronic DC equipment

Easy to carry, flexible;

l Products are exported to Middle East,

l South Africa, South America and other places.

l At present, more than 30000 sets of sales,

l the basic Failure free operation for 3 years.

Parameter

Mini PV power system works with 30W PV panels to charge 12V/35A gel battery, and output DC power. Max output power is 30W.

Mini PV power system applied to unelectrified area for lighting, low power fans and etc., like mountain area, camping.

Mini PV power system batteries are charged by solar energy generated from the solar system.and DC output of invert Ac output Maximum output power shall not exceed the setting system power.

The mini PV power system will be used in the area lack of or without of electuicity.likemountainous area camp etc.the mini PV power system electricity can be used for lighting,fun,charger and some other low power home appliances

DC input / output, no inverter.

USB connector, for electronic DC equipment

Easy to carry, flexible;

l Products are exported to Middle East,

l South Africa, South America and other places.

l At present, more than 30000 sets of sales,

l the basic Failure free operation for 3 years.

Mini PV power system Operating Instructions

1. Charging: turn on the switch “power”, place the solar penal exposed to direct sunlight, insert the plug of the solar penal into the “solar” socket on the main device. When the charging indicator light is on, charging is in process. Flashing of the charging indicator light means charging is completed. Charging from other electricity source is optional.

2. Using with load: the system has three outputs and protection from overload and short circuit. The indicator light will be off in case of overload and short circuit. The light turns on when load is disconnected. Lifting overload by lowering the actual load will resume operation of the device. When batter power is low, all outputs are turned off. Timely recharging resumes operation of the device and prolongs useful life of the battery. If possible, connect the main device to solar penal permanently.

3. USB output is 5.5V/500mA, usable for digital products including mobile phones. Due to the variety of digital products, please prepare your own USB connection cables.

4. Please recharge as soon as possible when battery is dead, so as to maintain adequate power supply. Turn on “power” switch for recharging.

5. Press “test” button to check remaining power storage at any time,The Yellow LED flashes means the Power is running low or has run out.

6. Turn off “power” switch after use.

7. AC usage Instruction: AC and DC are separately output for this machine, if you want to change to be AC Mode, please turn on “AC POWER” switch, the Green AC Indication LED will light on, AC outlet will work, then it is OK to insert AC load. Please turn off “AC POWER” switch if no need.

Mini PV power system Disclaimer and Trouble shooting

1. Dismantling and modifying without permission are prohibited. Our company takes no responsibility for any intentional damage or any damage resulting from the abovementioned prohibited behavior and improper use.

2. Indicator light if off when solar panel is connected: please check whether “power” switch is on and whether solar panel is on an open circuit.

3. Output indicator light is off: please press “test” to check whether there is enough power storage and recharge if there is not; in case of no output due to overload or short circuit, disconnect the load or lowering the load to resume power output.

Mini PV power system Maintenance

Keep upper side of the solar penal clean to ensure full exposure to sunlight.Protect main device from rain and keep it indoor if possible.

Pictures of other kinds for reference

FAQ

1. Q: Do you have your own factory?

A: Yes, we have. Our factory located in Nanjing city, Jiangsu province.

2. Q: How can I visit your factory?
A: Before you take off from your country, please let us know. We will show you the way,or arrange time to pick you up if possible.
3. Q: Do you provide free sample?
A: Usually we do not offer free sample

4. Q: Could you print our company LOGO on the nameplate and package?

A: Yes, we can do that.

5. Q: Do you accept custom design on size?

A: Yes, if the size is reasonable.

6. Q: How do you overcome the anti-dumping and countervailing duties?

A: We can use original Taiwan solar cells, and provide Certificate of Origin of Taiwan.

7. Q: How can I be your agent in my country?

A: Please leave feedback. It's better for us to talk about details by email.

8. Q: Do you have solar project engineer who can guide me to install system?

A: Yes, we have a professional engineer team. They can teach you how to install a solar system.