Aluminum composite panel architectural wall material

1. Product Introduction

(1).STRUCTURE:

(2) DETAILS:

(3) RECOMMEND SIZE:

(4)CERTIFICATION:

(5)Best sellors:

(6).PROCESSING

1) Saw Cutting

It's recommended to use hard alloy blade.

2) Slotting

Make the U type slotting process with a distance 0.2 to 0.4mm from the polyethylene substrate,recommended slot angle is 110.

A.Milling machine and trimmer.Running speed:20000-30000rpm Feed speed:3-5m/min

B.When processing large quantity of U type slots,it's recommended to use round saw and belt saw.

flakeouter diameter:305mm number of teeth:24 running speed:3,000-5,000 rpm

3) Bending with folder

If operated on the platform,bending part can be made very tidy.Platen puncher,plate folder or bending dies are applied as bending equipment.

The recommended temperature for bending is over 10°C.

4)Bending with panel bender

When plate folder is used to finish the panel,dies shall be placed on with appropriate radius

5) Riveting

Countersunk rivet can realize easy joint from one direction

6) Bolting

Considering from deformation limit,formul e>2D is the best calculation way of aperture D and distance from hole center to plate end.

2.Product Feature

1) Super peeling strength

2) Excellent surface flatness and smoothness

3) Superior weather, corrosion, pollutant resistance

4)Even coating, various colors

5) Excellent heat and sound insulation

6) Superior impact resistance

7) Light weight and easy to process

8) Easy for install

3.Packing:

1. Bulk Packing (Recommend building panels) :3mm 1800pieces and 4mm 1600 pieces for a 20 feet container.

2.Wooden Pallet Packing (Recommend Signage Advertising Panels)

102~105 sheets per pallet ; 1*20’FCL loading 4~8 pallet , 1*40’ FCL loading 12~16 pallet .