All

Epoxy Polyester Electrostatic Powder Coating

Location:
Shijiazhuang, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Chemicals > Coatings

Product Description

Electrostatic Powder Coating,certified by ISO and BV,SGS

PRODUCTS RANGE:

Sort by chemistry:

Epoxy Polyester /Hybrid powder coatingEpoxy Powder CoatingPolyester TGIC -Free powder coatingPolyester TGIC Powder coatingPolyurethane powder coating

Sort by function:

Anti-gassing Powder Coating for cast steelClear Topcoat Powder CoatingHeat Transfer Powder CoatingHigh Temperature Resistant Powder CoatingMetallic/Peal Powder CoatingZinc Rich Epoxy Primer Powder Coating

PHYSICAL PROPERTIES

Specific gravity : 1.2 ~ 1.8g/cm3 up to colorsParticle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)Level of liquidity: 24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

.

Mechanical property

Testing items

Standards and methods

Inspecting index

impact strength

GB/T1732-1993, AS3715 2.8

>50kg/cm

Bending resistance

GB/T1185-88, AS1580 402.1, ISO9227

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88,2mm Cross cut, ISO2409

Pass100/100, passes 0 levels

Cupdrawing:Erichsen, ISO1520

Erichsen, ISO1520

Pass 3-7 millimeters

Pencil hardness

GB/T6739-86, Mitsubishi

Pass H-2H

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91,500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

GB/T17740-79(89),1000 hours

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours

Without air bubbles, the surface without damage

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

Uvioresistant

QUV-313,500 hours

Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Hebei Greens Machinery Manufacturing Co., Ltd.
Phone Number:
  86-311-85965533
Fax Number:
 
 
Hebei Greens Machinery Manufacturing Co., Ltd.
 Hebei , China FREE
 

Resources