Introduction of hot tyre retreading machine

1.Used tyre retreading machine, tire vulcanizing machine, tire retreading machine, equipment to change tires, machine for change tires, segmented tire curing machine.

For tyre retreading vulcanization, the most suitable for steel wire radial tire mould, light truck tire, passenger car tire,OTR tire and so on.

2.segment curing press/vulcanizing machine is used to cure/ vulcanize regular tie such as OTR tire,light truck tire, passenger car tire in hot retreading. It is designed with segment presses which provide tighter uniformity, allow for more complex and deeper tread designs, and result in an appearance similar to new tires. Typical industry mold curing utilizes 6-segment presses or 9-segment presses.

3.The casing is measured and selected precisely fit the mold.

4. This curing machine is also called Vulcanizing Machine or segmented mould curing machine, hot curing tank, vulcanization tank,

5. Tyre vulcanizing machine is used in hot tire retreading process

6. Tyre retreading equipmnt.

If you have any requirments about hot tire retreading machine, retreading tire curing equipment, retread tire machine, tire curing chamber,used tire recycling machine ,please feel free to contact us.

Brief Introduction of the Mold

1.The mold is a part of the segmented mould machine ,which is used in hot retreading

2.The Pattern of the mold can be changed according to the customers's needs

3.Different mold fits for different tire size ,it's not general mold

4. We offer OEM service

5. It is used in tire hot retreading together with the segment mold.

Hot retreading machines and price:

(1 )Choose waste tires that qualified to retread

(2)Tire inspection:Tire inspection machine

(3)Buffing. Buffing machine, you can choose one of them.

(4)Modify/repair, multifunction repair machine.

Lift weight	250kg
Lift height	876mm
Motor power	0.5kw
Weight	200kg
Dimension	500x920x876

(5)Cementing, use rubber cement mixing machine

Capacity	150L
Total power	1.5Kw
Dimension	1400x600x1000mm
Weight	260kg
Mixing speed	17rmp

6)Extrude rubber strips, there are two kinds of extruder machine, you can choose one of them.

7) Building. Building machine

(8) Glue sidewall Rubber. You can use sidewall laminating machine or you can glue sidewall rubber artificially without any machine.

1. Automatic control the tread length, cutting and building function.

2.Tread centering function, avoid off center building.

3. Tread stretching system, make tread have some tension with the casing, stable treads building.

4. Mechanism or electricity circumference measurement.

5. With safe and lifting device, safe, reliable, convenient.

9). Curing. Our hot retreading curing machine is PLC control segmented mould curing machine.

1. Automatic control temperature, pressure and curing time, with high productivity.2. With tire lifting device, convenient to load and unload tire.

Equipment mold clamping	80-100T
Tire sizes	16.00R24-23.00R25
Productivity	30-90(min/piece)
Hydraulic power	5Kw
Car tire segment mould curing machine	Power	2.2Kw
	Pressure	12Kg
	Curing temperature	135°C
	Dimension	1800X1900mm
	Weight	2500kg—3000kg
Truck tire segment mould curing machine	Power	2.2Kw
	Curing pressure	14Kg
	Curing temperature	135°C
	Dimension	2600X2800mm
	Weight	5500kg—6500kg
OTR tire segment mould curing machine	Power	18.5kw
	Inner diameter	1860cm
	Section height	85cm
	Tire outer diameter	1615-1673mm
	Curing temperature	136°C-160°C
	Curing pressure	26kg
	Heating method	Electric, steam, oil
	Dimension	4500x3300x3500mm
	Weight	20t

the tire before cure

the tire after cure

Qingdao Yushengyuan Rubber Co.,Ltd is specialized in manufacturing tire retreading equipments, retreaded tires and recycle rubber machines.

After-sale service:

A,A full set of related equipment drawing, including foundation figure

B, related technical training

C, Equipment installation and normal running

D, Engineer available to install machines and train workers overseas

Contact us:

.