TK-102 Original Personal/Vehicle Tracker+Quadband Real Time Spy Vehicle Car Tracker for GSM /GPRS/ GPS System Product show

1 Summary

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

2 ApplicationsØ Vehicle rental / Fleet management etcØ Powerful magnet+water proof,adsorbing in the hidden place of car.Ø Protect child / the old / the disabled / pet etcØ Provide peace-of-mind for businessmenØ Manage personnel/Track criminals secretly3 Hardware Description Main functions

1.compact size and easy to install

2.SMS/GPRS location updates

3. 30 seconds interval time tracking
4. Audio monitoring (listen in)
5.SOS emergency services
6.Move and geofence alert
7.overspeed/Low battery alert

8.Google map link SMS

9.Build-in antenna and battery

10. Easy charge battery from car

4.Specs.

Content	Specs.
Dim.	64mmx 46mm x 17mm(1.8”*2.5”*0.65”)
Weight	50g
Network	GSM/GPRS
Band	900/1800/1900Mhz
CPU	STCMCU
GPS chip	SIRF3 chip
GSM module	SIMCOM SIM300/SIM900B
GPS sensitivity	-159dBm
GPS accuracy	5m
Time To First Fix	Cold status 45s Hot status 1s
Wall charger	110-220V input 5V output
Battery	3.7V 850mAh Li-ion battery
Standby	48hours
Storage Temp.	-40°C to +85°C
Operation Temp.	-20°C to +55°C
Humidity	5%--95% non-condensing

5.Usage

5.1 SIM card installation

Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format.

Steps:

1 Open the rear cover, and pick out the battery.

2 Push the foil along and turn it left.

5.2 Battery and Charger

Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 48 hours use on end. After first use, the battery can be charged fully in 3-5hours.

Cautions:

a: For it’s Li-ion battery, which contains harmful chemicals and may burst, please don’t bump, puncture it violently and keep it off fire.

b: Please charge the battery in time to keep it working normally.

5.3 Startup

Put the SIM card and battery in place.

Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.

For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)

In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will keep on.

When this unit receives GPS signals normally, you can use it and do all the following settings.

5.4 InitializationSend “begin+ password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (default password: 123456)5.5 Change the password

Send SMS password+ old password+ space+ new password to change the password.

5.5.1please keep the new password in mind, contact with local dealers once lost .

5.5.2 Make sure the new password is in 6 digits, or else the tracker can not recognize the password.

5.6 AuthorizationThere are only 5 numbers able to be authorized.

5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.

5.6.2 Send SMS admin+ password+ space+ cell phone number to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply “admin ok!” in SMS.

5.6.3 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send admin123456 008613322221111 to tracker

5.7 Real-time polling

5.7.1If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up.

5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info as below:

send smslink123456 to switch the format to Google map link format, visit the link to see the map Cancel Google map Send: Begin123456

5.8 Auto Track

Report a Geo-info at 30s intervals to the authorized numbers for 5 times:

5.8.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits and at maximum 255 in value.

5.8.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times

5.8.3 Cancel: Send notn+password to delete the “ auto track ”

Remark: the interval must not be less than 30s.

5.9 Voice Surveillance

In this mode, the user can dial up the unit to monitor the voice (please refer to 5.10 for instruction).

5.10 Modes switch between “track” and “monitor”

5.11 Geo-fence

5.12 Movement alert

5.13 Overspeed alert:

5.14 IMEI checking:

Send SMS imei+password to the unit to check the IMEI number.

5.15 SOS

5.16 Low battery alert

It begins to alert when it is 3.7V and sends you SMS in 30m interval.

SMS format: low battery+Geo-info.

5.17 Hidden number tracking

When a hidden authorized number calls the tracker, the tracker will reply SMS with the hidden number&Geo-info to all the authorized numbers.

5.17.1 Send SMS “hide number” to set up the hidden number.

5.17.2 Send SMS “nohide number” to delete the hidden number.

5.18 Change time

5.19 GPRS setting

In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) bysending SMS commands.

5.19.1 Set an IP address and port:

Setup: Send SMS adminip+123456+space+IP address+space+port.

If setup successful, the tracker will reply SMS adminip ok

Cancel: Send SMS noadminip+123456

5.19.2 Set APN

Setup: Send SMS apn+123456+space+specify apn.

If setup successful, the tracker will reply SMS “APN ok”.

P.S. The old APN will be invalid when you set a new APN.

As soon as the IP & Port & APN are set up, the user can make a call or send SMS to tracker. The tracker will hand up the telephone and report the coordinates to IP address.

The message sent by tracker to IP address is as following:

Serial number + authorized number + GPRMC + GPS signal indicator + command + IMEI number + CRC16 checksum.

For example, it will send GPS coordinates as below illustrated

Our Free tracking platform

Package conent

1*TK102

2 x Rechargeable and changeable 3.7V / 800mAh Li-ion battery

1 x User Manual

1 x Adapter

1*munual

1*battery charger

Optional accessories

1* Hard-wired car charger

1* Cigar Ligher car charger

1* External battery 4000mhA

1*External battery 11000mhA

1*Waterproof bag

1* Magnetic cover

If you need some of them,please contact me any time,i will always at your service,thanks.