Mini Portable Real-time Personal GPS Tracker XT-107 With SD Card Save Data When GPRS Discontact

Product show:

Main Functions :

XT-107 Original Personal/Elderly tracker
Dimension:80*56*22mm weight:50g
1) ARM 7 processor inside ,quickly,stable

2) real time location updates

3) auto-tracking (intervals)
4) SOS emergency services
5)Move and geofence alert
6)overspeed limit alert
7)low battery alert

8)Google map link SMS

9)Build-in antenna and battery
10) SD card save data when gprs disconnect

11) GSM ID function

12) Build in motion senser

1 Summary
Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS.

2 Applications

Protect the child / the elder / the disabled / pet,etc.
Businessmen safety.
Personnel management.
Covert tracking.

3.2 Rear Face

4.Specifications

5 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off.
Step:
1. Open the Battery back cover
2.Open the SIM card slot and SD card slot,and put one SIM card and one SD card

6 Startup

Put the SIM card and SD card in place,insert the battery and the tracker is on.

The green led in the middle is power indicator, yellow led on left side is GSM indicator and blue led on right side is GPS indicator. Green indicator will be flashing quickly, yellow indicator will be on for 2 seconds and blue led does not flash when the tracker is on. Green indicator will be on for one second and off for three seconds in 20-30 seconds and yellow indicator will be on in 3 seconds’ interval which means the tracker gets GSM signal already.

Blue indicator will be flashing in 40-90 seconds which depends on the gps signal. Better gps signal makes the blue indicator flash in short time and poor gps signal make it flash in longer time. Blue indicator will not flash without gps signal.

7 Usage
The tracker has three working modes: TRACKING,MONITOR, double-way Communication.

8 Track Mode
8.1 Initialization

8.2 Password Settiing

8.3 Authorization

8.4 Auto-Track
This function can make the tracker to send sms or gprs data in fixed interval for fixed times

8.5 Tlimit Function

8.6 GPS-refresh setting

8.7 Reboot remotely

8.8 Geo-fence

8.9 Movement Alert

8.10 Overspeed Alert

8.11 IMEI Checking

8.12 Time Zone setting

8.13 SOS Button
Press the SOS button for 3 second, it will send “help me !+ Geo-info” to all the authorized numbers every 3 minutes. It will stop sending SOS sms or gprs data when one of the authorized numbers reply SMS ”help me+password” to the tracker.
(note: the default

8.14 SMS LINK

8.15 SMS ONE
Send “smsone+password”.The tracker will reply one SMS to admin number or gprs server. The same function with real-time tracking, but no need to call to the tracker

software only send one SOS alert. Pls contact with our company for the firmware with several SOS alerts)

8.16 Low Battery Alert
When the battery inside is less than 3.7 V, it will send low battery alert to admin number
8.17 SMS Center

8.18 GSM ID(this function can be add or delect for customization.)
GSM ID are in each sms or gprs data. The tracker can be found by GSM ID without gps signal. But the customers have to ask their GSM operator for data base of the GSM ID.
8.19 Motion Sensor
This function is for protecting the vehicel or tracker when it is touched

8.20 SD card function
A mini SD card can be put in the tracker’s SD card slot. The GPRS data can be saved in the SD card if GPRS is off. It will send data to the GPRS server again when GPRS is on

8.21 Switch on/off

8.21.1 Switch off
Press TALK button and SOS button for three seconds at same time, the green indicator will flash quickly until it is off.
8.21.2 Switch on
Press TALK button and SOS button for three seconds at same time, the green indicator will flash quickly until it is on.

9 Monitoring Mode(voice surveillance mode)

Send SMS monitor+password, the tracker repllies “monitor ok” then the tracker will get through automatically when you call and listen to it

10 Talking Mode

11 GPRS setting

11.1.1 Set TCP protocols

11.1.2 Set UDP protocols

11.2 Set IP address and port:

11.3 Set APN

11.4 Set APN’s User Name

11.5 Set APN’s Password

11.6 GPRS setting

GPRS format:

100312033421,13145826175,GPRMC,033421.851,A,2234.0209,N,11403.0733,E,1.87,347.73,120310,,,A*62,F,help me, imei:354776036842240,03,73.5,F:4.14V,0,138,46772,460,01,2533,720B

(Remark: There are two ways for the times of sending alarm in each setting.one time and heap of times,which is according to the customer’s requirements,this product also support platform issued instructions and computer USB send set, its instruction set instruction with SMS instruction)

Our platform

Shenzhen Haoday Technology Co., Ltd. is a manufacturer and reseller of GPS tracker and car alarm system with well-equipped testing facilities and strong technical force.

With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in fleet management, and tracking system and other industries.

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!