Powder Fiberglass Chopped Strand Mat rapid air lease

Product Description

E-Glass Powder Chopped Strand Mat is made of randomly distributed chopped strands held together by a powder binder. It is compatible with UP, VE, EP, PF resins. The roll width ranges from 50mm to 3120mm. Additional demands on wet-out and decomposition time may be available upon request.

Powder Chopped Strand Mat is made of randomly distributed chopped glass strands held together by an powder binder. P04 is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. It is designed for use in hand lay-up, filament winding, compression molding and continuous laminating processes.

Chopped strands mat Features

Compatible with multiple resin systems

Resin Compatibility:

Epoxy (EP)Phenolic resinUnsaturated polyesterVinyl ester UsesAutomotive partsBoats/yachtsBuilding componentsChemical corrosion resistant pipesCooling towersTanks Chopped strand mat pictures

Chopped strand mat Technical Parameters

property	area weight	moistrue content	binder content	tensile strength	width
EMC80	80	≤0.20	9±5	≥50	±5
EMC100	100	≤0.20	9±5	≥70	±5
EMC120	120	≤0.20	9±5	≥100	±5
EMC225	225	≤0.20	2-8	≥80	±5
EMC300	300	≤0.20	2-8	≥130	±5
EMC450	450	≤0.20	2-8	≥150	±5
EMC600	600	≤0.20	2-8	≥170	±5
EMC900	900	≤0.20	2-8	≥180	±5
Test method	ISO3374	ISO3344	ISO1887	ISO3342	ISO5025

Chopped strand mat Packaging

Each Powder Chopped Strand Mat is wound onto a cardboard tube which has an inside diameter of 90mm. The outside diameter of the roll is approximately 340mm. Each roll is wrapped in plastic film and then packed in a cardboard box. The rolls are stacked horizontally or vertically onto pallets. All pallets are then stretch wrapped and strapped to maintain stability during transportation.

	Roll Weight (Kgs)	Roll Weight (Lbs)	Roll Length (Yards)	Roll Length (In.)	Roll Length (M)
EMC300-965	39.00	85.98	148.00	5,328.00	135.00
EMC300-1040	40.00	88.18	148.00	5,328.00	135.00
EMC300-1270	51.00	112.43	148.00	5,328.00	135.00
EMC300-1524	62.00	136.69	148.00	5,328.00	135.00

Chopped strand mat Storage

Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively.
Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

Factory Picetures

product list

fiberglass roving for spray-up

fiberglass rovings for SMC

fiberglass rovings for thermoplastics

fiberglass roving for filament winging

fiberglass Rovings for pultrusion

fiberglass for Continuous panel molding process

fiberglass roving for gypsum

fiberglass chopped strand mat

fiberglass for woven roving

fiberglass for sleeper train

fiberglass for hobas pipes

Please feel free to send your feedback for encouraging us to serve you.

we are looking forward to develop business relationship with customers from all over the world and we look forward to your

cooperation.

we will answer you ASAP!!!

weclome again.

SKYPE: sanowart03