ARM 7 Processor Inside ,Quickly,Stable TK103-2 Vehcle/motorcycle/cars trucks GPS Tracker SOS Emergency Services

1 Summary

Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS,and guard against theft of Vehicle.

2 Applications

Rental vehicle / Fleet management etc

Covert tracking

Hardware Description

1. Black wire:-12V;

2. Red wire:+12V;

3. Purple wire:ACC;

4.White wire:connecting guard against theft implement(reserve-wire,it can be not connected.)

5.Microphone

6.External-relay connector

7.SOS button

SIM card installation

Make sure that there is no call transfer and call display is on, and PIN code off.

Steps:

Install SIM card A:

1 Open the tracker rear cover, take out the mainboard,and put SIM card A into the holder.

2 Put in a SD card beside the SIM card A (at the back side of the maniboard)

3. Close the tracker back cover by tightened the screws

Install SIM card B:

1. Use a pen to open the SIM card B slot

2. Put a SIM card B into the slot.

3. Insert the slot with SIM card into the tracker.

NOTE:If you only use one sim card,then the sim card must be insert into the sim card B slot,but not the sim card A slot on the mainboard.

Usage

The tracker has three working modes: Fortifying mode, Tracking mode and Monitoring mode. Modes switch between “fortifying”, “ tracking” and “monitoring”.

When power on the tracker, the default mode is “Fortifying” mode, you can send“tracker+password” to switch to tracking mode, or

send“monitor+password” to switch to monitoring mode, or “fortify+password” back to fortifying mode.

Main functions

1.Fortifying Mode

a.Engine Started Alert

b.Movement Alert

c.PowerCutoff Alert

d.Application in the Car Alarm System

d.Checking the Working Status ( fortify or no fortify )

2.Tracking Mode

A.Initialization

B.Change the Password

C.Authorization

3. Auto-Track

This function is using for the user to receive SMS with Geo-info in a certain time

4.SIMcard A-B Transformation

5.SD card function

A mini SD card can be put in the tracker’s SD card slot. The GPRS data can be saved in the SD card if GPRS is off. It will send data to the GPRS server again if GPRS is on.

6.Geo-fence

Set up a geo-fence for the unit to restrict its movement within a district. The unit will send message to the authorized numbers when it moves out of this district.

Notes: This function will be invalid if the unit moves outside the district. You need to re-set it if you want this function again.

7.Movement Alert

8.Overspeed Alert

9.IMEI Checking:

Send SMS imei+password to the unit to check the IMEI number of the unit.

10.Low Battery Alert

It begins to send SMS to the user every 30minutes when the the battery voltage is lower than 3.7V.

SMS format: low battery+Geo-info.

11. GPRS Setting

In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by either cell phone, or our PC software.

(NOTE:Some countries or regions should set APN’s User Name and APN’s Password.)

11.Monitoring Mode(voice surveillance mode)

Send SMS monitor+password, the response from the tracker is “monitor ok”

then you can hear the voice around the tracker after your call.

12. Remote Oil&Electricity Cut-off Function

Free Tracking Platform:

Package including

1*TK103-2 GPS Tracker

1 x relay

1 x GPS antenna
1 x GSM Antenna
1 x color box packaging

Company Description:

Shenzhen Haoday Technology Co., Ltd. is a manufacturer and reseller of GPS tracker and car alarm system with well-equipped testing facilities and strong technical force.

With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in fleet management, and tracking system and other industries.

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!