8012A1/B

Adopt advanced high-technology and good quality raw materials to produce epoxy resin, it has low shrinkage during curing , good tenacity after curing .It suits for metal products ,paper, stone products adhesion.

1,8012A1(short for A),8012B(short for B)product specification:

Appearance Colour	A	Black dense liquid	Mixing ratio	A/B=100/100 ( by weight)
	B	Brown liquid
Specific gravity (25°C,g/cm3)	A	1.20±0.02	Pot life	90 mins(@25, mixed 100g)
	B	1.01±0.02
Viscosity (40°C,cps)	A	6000~8000	Curing time	25°CX20hrs or 60X 2hrs
	B	3200~4200
Shelf life(25°C)	A	2 month	Remark	NO
	B	6 month

2,System properties hardened index:

Hardness	Shore D	≥70
H.D.T	°C	100
Resistance impact tension	Kg/mm2	14~15
Tensile strength	Kg/mm2	12~13
Intensity of pressure	kg/mm2	15~16
Transverse resistivity	Ω·cm	≥2.8×1015
Dielectric strength	Kv/mm	≥15

3. Application Attention

a.Pay attention to the pot life time ,when part A and part B mixed ,please try to use up during pot life stated above , or it will effect the application techniques and quality of the products.

b.The liquid of the container, once opened, should be tightly re-covered to avoid the resin from deteriorating by other materials pollution

4. Safety Attentions

This product does not belong to dangerous article when curing completely. But incompletely cured epoxy resin and hardener have more or less plethora to human body .So please pay attention to following points

Keep working condition clean, air fresh ,if possible ,provide a ventilator Avoid contact with human body directly Wear gloves Wash hands carefully with soap ,if possible wash with acetone and alcohol first ,then soap and water If contacts with hardener , to cause skin allergic, Please dip it in 1% dilute acetum liquid for 30 minutes ,then seek medical treatment If eye contacted ,please wash with running water for 15 minutes ,then seek medical treatment

5 Remarks

Such products performance was related with operational condition and actual operation ,the seller can not guarantee practicability of some specific purpose. Also the seller can not control the operational way of epoxy in customer side ,in any cases ,the seller will not afford the losses causes in customer side .When applying the product, the customer should have related testing experimentation prior to try big quantity.