QC11Y 16X2500 STEEL PLATE HYDRAULIC GUILLOTINE SHEAR MACHINEProduct Description

All our Electronic Elemens are all made from China Famouse Enterprise like SIEMENS CHINA AND SCHNEIDER CHINA.The components excellence ensure the machine excellenceFrom Below photos,you can see all SEIMENS AND SCHNEIDER elements.And the outside box is int'l standard long box with outstanding apperance.All the cable has been cleared labelled for a future checking

The Shearing Machine are well connected by high quality connectors ,this connector has endurance for high-pressure and both inside and outside has anti-rust treatment. This high-quality is top brand in China and they can protect the pipes and avoide any leakage for the hydraulic oil.Worldwide Dealer are all like our machines becasue their high quality and without any leakage engineer care and treatment.

The Hydraulic Oil tank in our machines are not for side-side welding,our tank is just one large plate and we bend them directly into a tank.In this way,The welding side is just one side and the tank has tightly equipped into the machine body.In this way,they will avoide hydaulic oil leakage also.And also all tank has been equipped with filter and oil level monitor.You can easily in check out the temperatue and also the oil level and the tank has longtem protective filter sytem.The top side is a large hole for filling into the hydaulic oil ,this is special design for our machines.And this is our one advantage.

The hydaulic system is USA OMG.The hydraulic system and valve is the heart of the machine to guarantee the enough stable power.Our system is USA BRAND CHINA OMG.OMG has worldwide reputation because of their reasonable design and rich history experience.You will benefit from this system and we will feel much relax for all after-sale system.

The machine under ANTI-RUST treatment.All machine has been painted ANTI-RUST paiting before the last color on.This is necessary step and you will have a longterm worthful machine.all the machine in our side should be milled,You can see the machine holes ,they are so smooth because they are milled integrated.

The Humanization Design--Machine will help to enhance the efficiency of the user.Our machines are all well equipped with inclined cutted platform.The cutted plate will automatic be down through it.Can be picked up to check conveniently.

The ball will help this procedure.

Client Visit

The Main Structure Character of QC11Y Series Hydraulic Shear Machine(Standard)

The guillotine shear machine is second enhanced shear machine and widely used in all plate metal solution industry.

Weld :The machine body is all welded connected through good quality steel plate. The process has gone through the vibration and aging treatment to eliminate internal stress with good rigidity and high stability.

Machine is composed by front-feeding platform, working table, machine front body, side electronic-box, Hydraulic system including gear pump and hydraulic valve, Motor, Backgauge, Nitrogen pullback cylinder, and control or display nc/cnc system and cutted plate lift declined platform,cylinder,hydraulic oil tank, pipe connectors and high-pressure pipes.

1. The front –feeding platform has equipped with ruler for the plate feeding and also smooth in the surface to protect the plate in any surface hurting when feeding. The ruler can be precision into MM or more unit for accuracy control and checking.2. The working table has equipped with ball or round bar steel to support the plate into feeding and also the protection for any surface lacerate.3. The electronic box been equipped with good certificated components.Mostly we use CE certificated SIEMENS or Schneider components for exportation machines and also some high quality CCC certificated components to carte for different standard needs clients.4. The machine body steel ,we mostly choose China top brand steel plate provider Shanghai BAOSTEEL with good quality and been treated with anticorrosive paint before the last paint on. So the machine firstly will have good durable usage and also perfect outside appearance.5. The blade :The blade material is 9CrSi or 6CrW2Si, the material is high tested material with thousand times for high rigidity and cutting result. The up blade is rectangle blade with four blade edges which is different from QC12Y Swing Beam shear machine (The detailed please check SIECC/SIECCTECH blade explain photo and instruction). The blade clearance can be adjusted by manual or by motor. Both has the index dial to display the clearance so the control and display can be easily. And the up blade shaft use tilting structure to promote the shearing precision.6. The machine equipped the press foot to press the plate stably when cutting, the foot has been equipped with plastic surface with high fraction without surface destroy of the plate. For Hole plate,we will equip square foot for stable square press.7. Gear Pump: We use good brand “straight conjugate internal gear pump” in both China brand Shanghai chengjie or Germany Eckerler. The internal gear pump is treated as never wear pump in industry and has been widely used in high precision hydraulic machines with the character of low-noise, no pulsation and long lifetime. Shanghai Chengjie gear pump also used in China’s aircraft industry so it is trustable and reliable. When in high speed working, the audio is flat and smooth even no trapping. The long lifetime is depend on his abrasive performance the inner machine components has oil film protection layer, so even use normal hydraulic oil, even no abrasion.8. The hydraulic system can use Germany Rexroth or USA OMG system. The return is controlled by nitrogen return cylinder with stable working process and easy in operation. The hydraulic press enforced up transmission and nitrogen impose the up push-out with good cooperation working.(The working principle can revert to SIECC technology drawing of QC11Y and QC12Y)9. Backgauge are counted by counter and can be micro-adjusted and is motor drived.10. the machine will be equipped with fence protection door before the cutting blade and the press foot.The fence can be opened if any needed. Near the throat,we will equipped with open-available door for person security but open-able when needs any inside checking.11. Using three bearing rolling track to eliminate rail gap and enhance the shearing quality.(Machine drawing available for clearly explain)

Convenient working and person security protection(Optional)

1. The machine can be equipped with full closed back side door to prevent any careless inside when cutting.2. The machine can be equipped with cutted lift out declined platform under the backgauge for convenient operation.3. Light curtain can be equipped also for security standard needs.4. Light function is equipped for convenient checking and care when cutting.

NC/CNC System and advance touch screen funtion

1. The normal system for CNC are Nanjing ESTUN (Holand Delem 60% JOINTED) system: ESTUN E20,ESTUN E21 and ESTUN E200 system,DELEM DA310 and DELEM DA360 and also Swiss CYBELEC system DNC60 and CT6 (Touch Screen). X/Y axis can be controlled and displayed. The backgauge distance can be controlled and calculated into 1000MM long.2. The NC system will be ESTUN E10 mostly we use for high quality guarantee. FAQ

How about your machine quality?We are worry about the quality.

Brillante is a mature brand in CHINA,through our many years research in technology,our design including structure and detailed sercurity and precision has enhanced greatly,and can match all the CE standard or more strict standard.Our machines distribute worldwide to about 50 countries where there are metal plate industry ,there are Brillante machines.And where there are our machines,there are good reputation and terminal user satisfaction.

Whether the machine price can be more discount

Brillante always provide high quality machine,as we know ,oversea market is more important and difficult than domestic market because of communication time costing after sales,So always,our machine has enough qaulity standard to make sure the machine can work more than the real warranty period.In this way ,we will save a lot and think in advance for the clients.
Actually Brillante also think about our price level,we are sure to provide quality=price and pice=quality ,the matched price and acceptable for the clients and durable for our machines.We welcome your negotiate with us and get a good satisfaction.

How about your manufactory in CHINA

Brillante located in HAIAN CITY,NANTONG,JIANGSU province who is the leading area in China and also in the worldwide as the center of the metal plate solution machines,We have worked about 10 years in this area and totally have about 150 staffs.Rich experience in this field with professional technical supporting and oriented service.
We welcome your visit to us any time.

Brillante provide oriented after-sales service including the oversea engineers trainning available and also international dealer center for any emergency guidance.We have established worldwide network to guarantee our timely response for your any demand no matter where are you.

We welcome engineers from your side to learn the technical design and normal maintenance here,this will help your easy in understanding and helpful if you need to be our dealer.
However,donto worry,we have our company own CD/Manual to show you along with the machine.So you can learn this from the existing docments to deepen your knowledge and understanding.
Anyhow there are another way is through internet video face to face for machine teaching, because of the high development in internet,the world has become smaller and you can easy cath us if any assistance needed.
Through all the ways,we will guarantee the service quality and ensure you will be well helped anytime anywhere.