The pre-cooled and pre-carbonized liquid flows through the inlet valve into the pot, in which, there is carbonic acid gas as well. The liquid flows out the groove and turns into a liquid curtain for better cooling and good carbonic acid gas absorption. Finally, the treated beverage liquid, powered by the carbonic acid gas pressure, flows into the filling machine.
Quality materials are used for this machine. Especially polished and sanitary steel is used for parts directly contacting the liquid. The machine is designed for various beverage productions. Besides the two-step carbonization, high CO2 content and low production temperature ensures the volume ratio of CO2 and 1L water to be 3.5 to 4.0, or higher

1).Technology data

1 .capacity0.5~10T/h

2 .Syrup :water 12~18

3 .The outlet of beverage <6

4. The outlet pressure of beverage0.3~0.5Mpa

5. CO2 content~4GV

2) Raw material requirement

1 .Water inlet pressure0.2Mpa

2 .Water inlet temp.<4

3 .Syrup inlet temp<8

4. CO2inlet pressure0.4~0.5Mpa

5. CO2 pure>99%