PAC polyaluminium chloride 30%,water treatment chemical

1. Product Description:

Polyaluminium chloride is made of high purity raw materials. And it is high-efficient, cheap and nontoxic inorganic high molecular compound. It is easily soluble in water and has high purity.

2.Product performance and reference pictures of polyaluminium chloride 30%

Polyaluminium chloride solid type is yellow/deep yellow powder for drinking water/waste water treatment.

3.Product Properties and Advantages:

1. Good effective and lower cost.Its purifying effect on low-temperature, low-turbidity and heavily organic polluted raw water is much better than other organic flocculant, furthermore, the treatment cost is lower.

2. Flocculation ability .It can lead to quick formation of flocculantwith big size and rapid precipitation service life of cellular filter of sedimentation basin.

3. PH broad in scope.It can adapt to a wide range of pH value (5−9), and can reduce the pH value and basicity after processing.

4.Adopting to various source of water. The dosage is smaller than that of other flocculants. It has wide adaptability to the waters at different temperatures and at different regions.

5. Higher basicity, lower corrosive, easy for operation, and long-term use of non-occlusion.

4. Specification: polyaluminium chloride 30%

Drinking water treatment:

Industrial wastewater treatment:

5.Application field:

Polyaluminium chloride is widely applied in drinking water purification, domestic sewage and industrial waste water treatment.

6.Packaging and storage: polyaluminium chloride

Solid :PP woven bag with PE lined bag (25kgs/bag) or PE bag (20 kgs/bag)

The product shall be sealed and stored in the dry and ventilated place to prevent from rain, high temperature and strong sunlight.

7. Production plant , equipment and the production process :

8.Laboratory :

PAC polyaluminium chloride 30%,water treatment chemical

skype:efren.feng