Specifications

1. special for sealing insulating glass

2. good adhesion to glass, aluminum

3. very low vapour transmission rate

Liniz LZ555 Hot melt butyl sealant

Description:

HOTMELT SEALANT is solvent free one component sealant sealing insulating glass units. It is for single seal and has good adhesion to glass. And it appears very low water vapor and gas transmission rate. Usually use with super spacer.

Where to use:

It is processed using adequate tank or barrel melting equipment. Recommended proceeding temperature is approx. 160°C to 180°CSurface to be bonded should be dry, clean and free from dust or grease.

Technical data :

ITEM RESULT

Base: synthetic rubber

Color: black

Consistency rigid material, process able only at elevated temperature 160°C to 180°C

Density approx.1.17g/cm3

Peel resistance ≥ 6N/mm

Gas permeability ≤ 0.01g/m2h

Water vapor transmission rate ≤ 0.2g/m2d

Volatile content ≤ 0,7%

Penetration approx 25 1/10mm

Color:BlackPacking:6.5kg/inner box 4pcs/cartonCarton size: Appro 55x40x22cmSuggest:While application together withLINIZ other corresponding products, it has already showed perfect function both in testing and practicing.