YJ-TY-18 Chongqing Yangjiang Waste management machinery

Location:
Chongqing, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

YJ-TY-18 Chongqing Yangjiang Waste Management Machinery

♦About Us

YANGJIANG provide all used lube oil recycling equipment and technology. This is more than simply used lubrication oil disposal,we are not just purify used oil,instead, we developed an amazing regeneration process than can reclaim all kinds of waste black lube oil to clean base oil.This is the most effective process for lube oil recycling , TY vacuum system is to refine waste oil in a batch process.Waste lube oil after pre-treatment ,will be pumped into a catalyst reactor we will add two kinds catalyst blend with oil and heat in a distillation kettle under vacuum

Because the waste oil contain too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. and due to the traditional technology only can refine the waste oil to base oil, can’t use directly, so our company is researching the new technology about distilling machine, which can distill all kinds of waste oil into clean oil, easy to operation, and the lower operation cost.

♦Working principle

YJ-TY-18 Chongqing Yangjiang Waste Management Machinery adopt physicochemical actions to polymerize,

passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regeneration the Waste oil to clean oil, save the component of the oil.

YJ-TY-18 Chongqing Yangjiang Waste Management Machinery

Component

Percentage(%)

Gasoline&diesel oil

7%

Base oil

80-85%(abase on your water content)

Residue

7-10%

♦Brief Description

YJ-TY-18 Chongqing Yangjiang Waste Management Machinery is particularly suitable to refine used engine oil

including diesel engine oil, gasoline engine oil,motor oil,ship engine oil, truck oil, and used hydraulic oil, other used machinery lubrication oil

YJ-TY-18 Chongqing Yangjiang Waste Management Machinery remove water, impurity, acid base, tiny impurity dispersed in oil such as carbon particles, heavy metal ions, deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well.

♦Advantage:

1.Low cost, cost is 30$ for refine one tons used motor oil

2.Easy to operate,low operation cost, only 1-2 workers can control the machine.

3.The machine can recycle gasoline motor oil, diesel motor oil, all kinds of engine oil, and other lubricant oil to clean oil.

4.Environmental friendly. This machine is full-enclosed, there is no any harmful smell come out form the machine, colloid, oxid, acid, pitch will be converted to oil sludge, can be use as bitumen and fuel.

5.85% high recycling rate. This includes 6-8% diesel and gasoline mixture,80-85% base oil and 8-10% oil sludge.

6.Efficient vacuum systems

7.High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.

♦Process

YJ-TY-18 Chongqing Yangjiang Waste Management Machinery can convert used black mixed lube oil to base oil.This is the most effective process for lube oil recycling , TY vacuum system is to refine waste oil in a batch process.Waste lube oil after pre-treatment ,will be pumped into a catalyst reactor we will add two kinds catalyst blend with oil and heat in a distillation kettle under vacuum. As the temperature in the kettle rises, various cuts are liberated and rise as vapors, to be condensed in a condenser. The condensed products are available as different products correspondingto various kettle temperatures .

Finally, the process ends when the residual material in the kettle does not vaporize, even at a temperature of around 350°Celcius. At this point, the heating in the distillation process is stopped and the process is essentially complete.

Using advanced vacuum distillation technology,which is different from the traditional sulfuric acid and the flocculation process. Traditional process uses sulfuric, water glass(Na2O.mSiO2 ,1%),TEPA(Tetraethylenepentamine)C8H23N5,1-2%) and activity clay(25%) to treat used motor oil. These additives are expensive and TEPA is very difficult to buy.

YJ-TY-18Chongqing Yangjiang Waste Management Machinery

No

Item

Unit

Technical data

Light base oil

Medium/heavy base oil

1

Viscosity(40°C)

mm2/s

16~32

28~72

2

Viscosity index

≥99

>110

3

Appearance

Transparency

Transparency

4

Color index

ASTMD 1500 Number

≤1

≤2

5

Pour point

°C

-15

-10

6

Water content

%(W/W)

≤0.05

≤0.05

7

Flash point(open)

°C

≥180

≥210

8

Ash content

%(W/W)

0.005

0.005

9

Carbon residue

%(W/W)

≤0.13

≤0.13

10

Corrosion(copper,100°C,3h)

Qualified

Qualified

11

Acidity

mgKOH/g

≤0.05

≤0.05

♦Pictures Display



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Chongqing Yangjiang Machine Manufacturing Co., Ltd.
Phone Number:
  86-23-65770714
Fax Number: