Reliable 2014 new type 3 in 1 automatic carbonated beverage/gas drink/soda drink filling machine

CGFD Washing, normal pressure Filling, Capping 3-in-1 soda drink filling machine is a new type self-developed equipment, which bases on years’ usual practice and adopt the advanced technology, and absorb many clients’ views. It meets the client’s requirement about filling different bottle size through one set. The suspension card bottleneck is adopted to make changing the bottle size more convenient. It can deliver the bottles automatically by blind and then washing,drying ,filling,covering,capping by order automatically. This equipment employs frequent and speed adjustment system so that it can adjust the speed freely and enable the operation user-friendly. This machine is mainly used in washing, filling and sealing for gas beverage( soda water, cola).

Specification

1. The suspending bottle-necks cramping design makes the whole production line more stable during the working process and it also avoids malfunctions caused by the differences of thickness and height of the bottle. This design also dramatically reduces the required number of changeable parts, makes it more convenient to change the different size bottles.

2. The advanced technology from Germany and Ital yare introduced. Isobaric filling technology is used in this machine. Filling quickly and the amount of the liquid can be controlled accurately. Also the beverage- holding tank is fully closed and the CIP interface is installed.

3 .Magnetic torque is used for screw capping, and the power of screw capping can be adjusted freely. It can use constant power screw the plastic caps and will not damage the caps.

4. Horizontal swirl wind-power cap-managing device is used to avoid damaging the surface of cap. And when there is shortage caps in the caps storage tank, cap swill be fed automatically.

5. Human-machine interface touch-screen is adopted in this machine. The liquid level in the tank can be controlled automatically. The filling and capping will stop automatically when there is not bottle.

6. All parts that have direct contact with the beverages are made of high quality stainless steel. And the main electrical components are from famous international companies.

7. We have embraced only those technologies that are the most practical and the most cost effective to own and operate.

8. We only offer those technologies which provide the best versatility, flexibility and reliability for the cost.

9. The filling machines we offer are listed below some information that will help you understand how to select the type and capacity filler you need for your operations.

Reliable 2014 new type 3 in 1 automatic carbonated beverage/gas drink/soda drink filling machine

CGFD washing, filling, capping 3-in-1 machine can be divided into three parts based on its main function.

a).The Washing Part

Bottles are bellowed into bottle shifting wheel by air conveyor , and when the flushing clamp reaches the position of bottle neck, the jaw will hold the bottleneck. Under the guide of leading rail, the bottle will be overturned to 180°into a up-right position, and then transmitted into filling position by secondary bottle shifting wheel.

b). The Filling Part

The Filling Part is mainly composed of the filling valve, the switch valve and filling transmission components. The finish-washed bottle is conveyed to filling position by the bottle shifting wheel. At the same time, the valve-opening mechanism will open the filling valve, which with bottle on it , to fill gas in it and then the machine begin to fill liquid. When the liquid level reaches the ration tube, it will stop filling. After closing the valve and finishing exhausting, the neck holding planet of the filling device will clamp the bottle and move down into the capping shifting wheel.

c). The Capping Part

The capping part is composed of 3 sets of screw head, capping transmission part, cap unscrambler, under cover tube and sleeving cover part. Filled-finish bottle will be conveyed to the capping position by the bottle shifting wheel. When the bottle passes the sleeving cover device, the bottle mouth can hung on the cap on the cap output part. And the cap from the sleeving cover will be sleeved on the bottle mouth, and then be planished by the tongue depressor. The cap screw head, which the torque has been adjusted on it, descends when it moves on the same straight line with the bottle, and the triplet cap ring gear will be sleeved on the bottle cap and move down . And then the triplet cap ring gear will shrink and sort the bottle cap under the pressure of the spring, at the same time he machine begins to screw. When the torque out numbered the adjusted magnetic , the capping head will automatically slip, thus protect the cap from being damaged by the rotary cap ring gear and insure the cap is not too tightening or too loose. Finally after the cap screw head is lifted with the lifting shaft, the machine completes a capping cycle. Bottles that have finished capping will be transported by the bottle pusher to the conveyor belt.

Picture show

Reliable 2014 new type 3 in 1 automatic carbonated beverage/gas drink/soda drink filling machine

Certificate :

Reliable 2014 new type 3 in 1 automatic carbonated beverage/gas drink/soda drink filling machine

How to get your suitable machine or production line ?

• Find our products through Reliable Machinery Co.,Ltd in Google ,Baidu. Bing ,Yahoo, Alibaba.com etc

•Enquiry: Contact us by email, phone call, fax, Instant Messenger (Trademanager, MSN, Skype) and let us know your enquiry.

• Discussion: Specify the items you desire, confirm specification; OEM/ODM consultation.

1.What kind of products will you produce ?

2. What is the capacity(per hour) you want ?

3. What kind of package , plastic bottle ,glass bottle : volume ,height ,neck diameter ,diameter of bottle or other please inform us of details .

4. Sole machine or whole production line ?

• Quotation: Prices offered and accepted.

• Place order as per contract or discussion.

• Perform invoice( sales contract ) In duplicate confirmed and kept by both sides.

• Payment settled.

• Order completed under our arrangement.

• Goods shipped as per contracted term.

• Goods arrive at local port or warehouse, depending on contracted term.

• Support & re-ordering.

We are specialized in beverage machine. We offer varies stand-alone devices(such as Processing System, Water Treatment System, Blow Moulding System, Filling System, UVT System, Secondary Packing System). Our company has years of design experience and numbers of proprietary technologies. Most of elements employ foreign advanced products. Long warranty time and good service will make you satisfied. Regular processing reports will tell you the production process roundly. We are Reliable-Machine Co.,Ltd. We can be your reliable supplier.

Zhangjiagang Reliable Machinery Co.,Ltd