mw series Miniature Circuit Breaker

Application

mw series miniature circuit breaker is mainly suitable for overload and short circuit protection. It is especially used for illumination and distribution in industry and commerce, etc. it is of pleasing outlook & high breaking capacity, reliable performance, high inflammable resistance and shock resistance for long service life. It is within the circuit of AC 50/60HZ, rated voltage of single pole up to 230V, two, three or four poles up to 400V. It can also be for an unfrequent switchover of the circuit and illumination under normal conditions.

Specifications

Packing Detail

1. Product Net weight: 128g/pole

2. Packing quantity& Weight: 12 pcs /box, 20 box/carton, 240 pole/carton .

3. N.W: 22.5 KG/carton

4. G.W:24 KG/carton

5. Packing Measurement: inner box 22.5×9×8 cm, Carton 46×23.5×33.5 cm ( ie 0.036 cbm)

6.20 foot container (28 cbm): 19,2000 pole ,800cartons

7.40 foot container (56 cbm): 38,4000 pole, 1600 cartons

1. When DX-S series Miniature Circuit Breaker

need store for a long time,not control the product store environment ,the metal and paint coat will be corroded.So ,take care:

2.Products must store with room temperature and dry environment .Sealing when under high humidity environment.

3.Don't store the products with acid volatile liquid and acid gas together.Don't store in high dust environment.

4.Don't store the products in high temperature and humidity or lowest temperature for a long time ,please install and use as soon as possible.

5.Don't contact the link wire before products used normally,preventing corrosion from pre-contacting.

6.Please inform and operate under the manufacturer' advise referring to special store environment such as high temperature and humidity,islands near equator,ultra-low temperature area.

Transportation guidance

1.Long distance transported with the matching distribution box ,circuit breaker should package separately and fixed when you use.

2.Desiccant should be placed within package under the wet environment of long-distance transportation.

3.Products by sea should with Sealed package: using the vacuum sealed packaging or plastic film packaging in a cabinet or box with products., preventing corrode metal parts from raining,watering , high-humidity and temperature.

4.Besides sealed package by sea,please using normal transport packaging to protect such as wooden boxes,iron boxes ,cabinets,etc.

5.Avoiding contact acid gas and liquid during transportation.

6.If products are caught in the rain or corroded during transportation,please use after the manufacture testing.

Product showing